P1465 – OBD-II DTC

OBD-II DTC P1465 – Wide open throttle A/C cutoff relay circuit

DTC P1465 meaning

DTC P1465 refers to a problem with the wide open throttle (WOT) A/C cutoff relay circuit. This code indicates that the engine control module (ECM) has detected an issue with the relay that controls the air conditioning system when the throttle is fully open. The purpose of this relay is to disable the A/C compressor to ensure maximum engine performance during high-demand situations, such as acceleration.

DTC P1465 symptoms

Common symptoms associated with DTC P1465 may include:

• Air conditioning not functioning properly
• Engine performance issues during acceleration
• Increased engine temperature
• Check Engine Light illuminated

DTC P1465 causes

Several factors can lead to the triggering of DTC P1465, including:

• Faulty A/C cutoff relay
• Wiring issues or short circuits in the relay circuit
• Faulty throttle position sensor
• Malfunctioning engine control module (ECM)

DTC P1465 seriousness

DTC P1465 can be considered a moderate issue. While it may not cause immediate engine failure, it can lead to reduced engine performance and inefficient operation of the air conditioning system. Ignoring this code may result in further complications, such as overheating or increased wear on engine components.

How to diagnose DTC P1465

To diagnose DTC P1465, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1465 code.
2. Inspect the A/C cutoff relay for any visible damage or corrosion.
3. Check the wiring and connectors associated with the relay for shorts or breaks.
4. Test the A/C cutoff relay using a multimeter to ensure it operates correctly.
5. Examine the throttle position sensor for proper function and calibration.
6. Check the ECM for any software updates or faults.

How to fix DTC P1465 step-by-step instructions

To fix DTC P1465, follow these steps:

1. Replace the faulty A/C cutoff relay if it is determined to be defective.
2. Repair or replace any damaged wiring or connectors in the relay circuit.
3. Calibrate or replace the throttle position sensor if it is malfunctioning.
4. Reprogram or replace the ECM if it is found to be faulty.
5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC P1465

To erase DTC P1465, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes from the ECM.
5. Disconnect the scanner and start the engine to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.