P1524 – OBD-II DTC

OBD-II DTC P1524 – Intake Manifold Runner Control (Stuck Closed)

DTC P1524 meaning

DTC P1524 refers to a diagnostic trouble code indicating that the Intake Manifold Runner Control (IMRC) is stuck in the closed position. The IMRC system is designed to optimize engine performance by adjusting the airflow into the engine based on various conditions. When the control mechanism fails to open, it can lead to reduced engine efficiency and performance issues.

DTC P1524 symptoms

Common symptoms associated with DTC P1524 may include:

• Reduced engine power
• Poor acceleration
• Increased fuel consumption
• Rough idling
• Check Engine Light illuminated

DTC P1524 causes

Several factors can lead to the triggering of DTC P1524, including:

• Faulty IMRC actuator
• Damaged or disconnected vacuum lines
• Electrical issues such as short circuits or open circuits in the IMRC circuit
• Carbon buildup in the intake manifold
• Faulty engine control module (ECM)

DTC P1524 seriousness

The seriousness of DTC P1524 can vary, but it generally indicates a problem that can affect engine performance. While it may not cause immediate catastrophic failure, it can lead to:

• Decreased fuel efficiency
• Increased emissions
• Potential long-term engine damage if not addressed

How to diagnose DTC P1524

To diagnose DTC P1524, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1524 code.
2. Inspect the IMRC actuator and its connections for any visible damage.
3. Check for vacuum leaks in the lines connected to the IMRC system.
4. Test the IMRC actuator operation using a multimeter.
5. Inspect the intake manifold for carbon buildup that may obstruct the runner.
6. Review the vehicle’s service history for any related repairs or issues.

How to fix DTC P1524 step-by-step instructions

To fix DTC P1524, follow these steps:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and replace any damaged vacuum lines.
3. Repair or replace the IMRC actuator if it is faulty.
4. Clean the intake manifold to remove any carbon buildup.
5. Check and repair any electrical issues in the IMRC circuit.
6. Re-scan the vehicle to ensure the code does not return.

How to erase DTC P1524

To erase DTC P1524, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.