P1525 – OBD-II DTC

OBD-II DTC P1525 – Intake Manifold Runner Control Circuit Malfunction

DTC P1525 meaning

DTC P1525 refers to a malfunction in the Intake Manifold Runner Control (IMRC) circuit. The IMRC system is designed to optimize engine performance by adjusting the airflow into the engine based on various conditions. When the Engine Control Module (ECM) detects an issue with the IMRC circuit, it triggers this diagnostic trouble code (DTC).

DTC P1525 symptoms

Common symptoms associated with DTC P1525 may include:

• Check Engine Light illuminated
• Reduced engine performance
• Rough idling or stalling
• Decreased fuel efficiency
• Unusual engine noises

DTC P1525 causes

Several factors can lead to the triggering of DTC P1525, including:

• Faulty intake manifold runner control actuator
• Wiring issues or damaged connectors in the IMRC circuit
• Vacuum leaks affecting the IMRC operation
• Faulty Engine Control Module (ECM)
• Contaminated or damaged intake manifold

DTC P1525 seriousness

DTC P1525 can be considered serious as it may lead to reduced engine performance and efficiency. If left unaddressed, it can result in further engine damage or increased emissions. It is advisable to diagnose and repair the issue promptly to maintain optimal vehicle performance.

How to diagnose DTC P1525

To diagnose DTC P1525, follow these steps:

• Use an OBD-II scanner to confirm the presence of the code.
• Inspect the IMRC actuator and its wiring for any visible damage.
• Check for vacuum leaks in the intake manifold.
• Test the IMRC actuator operation using a multimeter.
• Examine the ECM for any faults or updates.

How to fix DTC P1525 step-by-step instructions

To fix DTC P1525, follow these steps:

1. Clear the DTC using an OBD-II scanner.
2. Inspect the IMRC actuator and replace it if faulty.
3. Repair or replace any damaged wiring or connectors in the IMRC circuit.
4. Fix any vacuum leaks found in the intake manifold.
5. Recheck the system to ensure proper operation and clear any remaining codes.

How to erase DTC P1525

To erase DTC P1525, follow these steps:

• Connect an OBD-II scanner to the vehicle’s diagnostic port.
• Turn on the ignition without starting the engine.
• Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
• Confirm the action to clear the trouble codes.
• Disconnect the scanner and start the engine to verify if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.