P1533 – OBD-II DTC

OBD-II DTC P1533 – Subsidiary Throttle Valve Solenoid Circuit Malfunction

DTC P1533 meaning

DTC P1533 refers to a malfunction in the Subsidiary Throttle Valve Solenoid Circuit. This code indicates that the Engine Control Module (ECM) has detected an issue with the electrical circuit that controls the subsidiary throttle valve, which is responsible for regulating airflow into the engine during various operating conditions.

DTC P1533 symptoms

Common symptoms associated with DTC P1533 may include:

• Check Engine Light illuminated
• Reduced engine performance
• Unstable idle or stalling
• Increased fuel consumption
• Difficulty in acceleration

DTC P1533 causes

Several factors can lead to the triggering of DTC P1533, including:

• Faulty subsidiary throttle valve solenoid
• Wiring issues such as shorts or open circuits
• Corroded or loose electrical connectors
• Faulty Engine Control Module (ECM)
• Vacuum leaks affecting throttle operation

DTC P1533 seriousness

The seriousness of DTC P1533 can vary based on the vehicle’s symptoms. While it may not cause immediate safety concerns, it can lead to:

• Decreased engine performance
• Increased emissions
• Potential damage to the engine if left unaddressed

It is advisable to diagnose and repair the issue promptly to maintain optimal vehicle performance.

How to diagnose DTC P1533

To diagnose DTC P1533, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1533 code.
2. Inspect the wiring and connectors related to the subsidiary throttle valve solenoid for damage or corrosion.
3. Test the resistance of the solenoid using a multimeter to ensure it is within specifications.
4. Check for vacuum leaks in the intake system that may affect throttle operation.
5. Clear the code and perform a road test to see if the code reappears.

How to fix DTC P1533 step-by-step instructions

To fix DTC P1533, follow these step-by-step instructions:

1. Inspect and repair any damaged wiring or connectors related to the subsidiary throttle valve solenoid.
2. Replace the subsidiary throttle valve solenoid if it is found to be faulty.
3. Address any vacuum leaks in the intake system.
4. Recheck the electrical connections to ensure they are secure and free of corrosion.
5. Clear the DTC using an OBD-II scanner and perform a test drive to verify that the issue is resolved.

How to erase DTC P1533

To erase DTC P1533, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the engine to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.