P1537 – OBD-II DTC

OBD-II DTC P1537 – IMCC Circuit Malfunction

DTC P1537 meaning

DTC P1537 refers to a malfunction in the Intake Manifold Control Circuit (IMCC). This code indicates that the Engine Control Module (ECM) has detected an issue with the electrical circuit that controls the intake manifold’s variable geometry or runner control. The intake manifold is crucial for optimizing engine performance, and any malfunction can lead to reduced efficiency and power output.

DTC P1537 symptoms

Common symptoms associated with DTC P1537 may include:

• Check Engine Light illuminated
• Reduced engine performance
• Rough idling or stalling
• Poor fuel economy
• Increased emissions

DTC P1537 causes

Several factors can lead to the triggering of DTC P1537, including:

• Faulty intake manifold control actuator
• Wiring issues such as shorts or open circuits
• Corroded or loose electrical connectors
• Faulty Engine Control Module (ECM)
• Vacuum leaks in the intake system

DTC P1537 seriousness

The seriousness of DTC P1537 can vary depending on the underlying issue. While it may not cause immediate catastrophic failure, it can lead to:

• Decreased engine performance
• Increased fuel consumption
• Potential long-term engine damage if left unaddressed

It is advisable to diagnose and repair the issue promptly to maintain optimal vehicle performance.

How to diagnose DTC P1537

To diagnose DTC P1537, follow these steps:

1. Use an OBD-II scanner to confirm the DTC and check for any additional codes.
2. Inspect the intake manifold control actuator and its wiring for visible damage.
3. Check electrical connectors for corrosion or loose connections.
4. Test the actuator’s operation using a multimeter to ensure it receives the correct voltage.
5. Inspect for vacuum leaks in the intake system.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC P1537 step-by-step instructions

To fix DTC P1537, follow these steps:

1. Identify and repair any damaged wiring or connectors related to the intake manifold control circuit.
2. Replace the intake manifold control actuator if it is found to be faulty.
3. Ensure all vacuum lines are intact and free of leaks.
4. Recheck the electrical connections to the ECM and ensure they are secure.
5. Clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to confirm that the issue is resolved and the code does not return.

How to erase DTC P1537

To erase DTC P1537, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the engine to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.