P1565 – OBD-II DTC

OBD-II DTC P1565 – Intake Manifold Runner Control (Bank 2) Stuck Open

DTC P1565 meaning

DTC P1565 refers to the Intake Manifold Runner Control (IMRC) system for Bank 2 being stuck open. The IMRC system is designed to optimize engine performance by adjusting the airflow into the engine based on various conditions. When the system detects that the runner is not functioning as intended, it triggers this diagnostic trouble code (DTC).

DTC P1565 symptoms

Common symptoms associated with DTC P1565 may include:

• Reduced engine performance
• Rough idling
• Increased fuel consumption
• Check Engine Light illuminated
• Possible engine stalling

DTC P1565 causes

Several factors can lead to the triggering of DTC P1565, including:

• Faulty intake manifold runner control valve
• Vacuum leaks in the intake system
• Wiring issues or short circuits in the IMRC circuit
• Faulty engine control module (ECM)
• Carbon buildup in the intake manifold

DTC P1565 seriousness

The seriousness of DTC P1565 can vary. While it may not cause immediate catastrophic failure, it can lead to:

• Decreased engine efficiency
• Increased emissions
• Potential long-term engine damage if not addressed

It is advisable to diagnose and repair the issue promptly to maintain optimal vehicle performance.

How to diagnose DTC P1565

To diagnose DTC P1565, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the intake manifold runner control valve and its connections for damage or disconnection.
3. Check for vacuum leaks in the intake system.
4. Test the IMRC valve operation by applying direct voltage to see if it opens and closes properly.
5. Examine the wiring and connectors for any signs of wear or corrosion.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC P1565 step-by-step instructions

To fix DTC P1565, follow these step-by-step instructions:

1. Gather necessary tools: OBD-II scanner, multimeter, vacuum gauge, and basic hand tools.
2. Inspect the intake manifold runner control valve for any physical damage or blockage.
3. Check all vacuum lines connected to the intake manifold for leaks or cracks.
4. Test the IMRC valve with a multimeter to ensure it is receiving the correct voltage.
5. If the valve is faulty, replace it with a new one.
6. Repair or replace any damaged wiring or connectors found during inspection.
7. Clean any carbon buildup in the intake manifold that may be affecting the valve operation.
8. Reassemble any components removed during the inspection and testing process.
9. Clear the DTC using an OBD-II scanner and take the vehicle for a test drive to ensure the issue is resolved.

How to erase DTC P1565

To erase DTC P1565, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.