P1568 – OBD-II DTC

OBD-II DTC P1568 – IMCC Circuit Malfunction

DTC P1568 meaning

DTC P1568 refers to a malfunction in the IMCC (Intake Manifold Control Circuit). This code indicates that the Engine Control Module (ECM) has detected an issue with the circuit responsible for controlling the intake manifold’s variable geometry or position. The IMCC plays a crucial role in optimizing engine performance, fuel efficiency, and emissions control by adjusting the airflow into the engine based on various operating conditions.

DTC P1568 symptoms

Common symptoms associated with DTC P1568 may include:

• Check Engine Light illuminated
• Reduced engine performance
• Poor fuel economy
• Rough idling or stalling
• Increased emissions

DTC P1568 causes

Several factors can lead to the triggering of DTC P1568, including:

• Faulty IMCC actuator or motor
• Wiring issues, such as shorts or open circuits
• Corroded or damaged connectors
• Faulty ECM or software issues
• Vacuum leaks affecting manifold pressure

DTC P1568 seriousness

The seriousness of DTC P1568 can vary depending on the underlying issue. While it may not cause immediate catastrophic failure, it can lead to:

• Decreased engine performance
• Increased fuel consumption
• Potential long-term damage to engine components
• Failure to pass emissions tests

It is advisable to address this code promptly to maintain optimal vehicle performance and compliance with emissions regulations.

How to diagnose DTC P1568

To diagnose DTC P1568, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Check for any additional DTCs that may provide more context.
3. Inspect the IMCC actuator and its wiring for visible damage or disconnections.
4. Test the IMCC actuator for proper operation using a multimeter.
5. Examine the ECM for any software updates or faults.
6. Check for vacuum leaks in the intake manifold system.

How to fix DTC P1568 step-by-step instructions

To fix DTC P1568, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the IMCC circuit.
3. Replace the IMCC actuator if it is found to be faulty.
4. Ensure that all vacuum lines are intact and free of leaks.
5. Reprogram or replace the ECM if necessary.
6. Test drive the vehicle to see if the code reappears.

How to erase DTC P1568

To erase DTC P1568, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase DTCs.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.