P1580 – OBD-II DTC

OBD-II DTC P1580 – Pedal Position Out of Self Test Range

DTC P1580 meaning

DTC P1580 refers to a diagnostic trouble code indicating that the pedal position sensor is out of the self-test range. This code is triggered when the Engine Control Module (ECM) detects that the input from the accelerator pedal position sensor does not fall within the expected range during a self-test. The pedal position sensor is crucial for determining the position of the accelerator pedal, which directly affects engine performance and throttle response.

DTC P1580 symptoms

Common symptoms associated with DTC P1580 may include:

• Illuminated check engine light
• Unresponsive or erratic throttle behavior
• Reduced engine power or limp mode activation
• Difficulty accelerating
• Inconsistent engine performance

DTC P1580 causes

Several factors can lead to the triggering of DTC P1580, including:

• Faulty accelerator pedal position sensor
• Wiring issues or poor connections in the sensor circuit
• Faulty Engine Control Module (ECM)
• Mechanical issues with the throttle body
• Calibration issues or software glitches in the ECM

DTC P1580 seriousness

DTC P1580 is considered a serious issue as it can affect vehicle performance and safety. The symptoms may lead to reduced power, making it difficult to accelerate or maintain speed. In some cases, the vehicle may enter limp mode, which limits engine power to prevent further damage. It is essential to address this code promptly to ensure safe driving conditions.

How to diagnose DTC P1580

To diagnose DTC P1580, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1580 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the accelerator pedal position sensor and its wiring for damage or disconnections.
4. Test the sensor’s voltage and resistance according to manufacturer specifications.
5. Examine the ECM for any software updates or calibration issues.
6. Perform a visual inspection of the throttle body for any mechanical issues.

How to fix DTC P1580 step-by-step instructions

To fix DTC P1580, follow these steps:

1. Clear the trouble code using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the accelerator pedal position sensor.
3. Replace the accelerator pedal position sensor if it is found to be faulty.
4. Check and clean the throttle body if mechanical issues are present.
5. Reprogram or update the ECM if necessary.
6. Test drive the vehicle to ensure the issue is resolved and the code does not return.

How to erase DTC P1580

To erase DTC P1580, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.