P1582 – OBD-II DTC

OBD-II DTC P1582 – Pedal Position Sensor Disagreement btwn Sensors

DTC P1582 meaning

DTC P1582 refers to a diagnostic trouble code indicating a disagreement between the pedal position sensors in a vehicle. This code is triggered when the Engine Control Module (ECM) detects that the readings from the accelerator pedal position sensors do not match. Typically, vehicles are equipped with two sensors to ensure redundancy and accuracy in measuring the position of the accelerator pedal. When these sensors provide conflicting data, it can lead to performance issues and trigger the check engine light.

DTC P1582 symptoms

Common symptoms associated with DTC P1582 may include:

• Check engine light illuminated
• Unresponsive or erratic throttle response
• Reduced engine power or limp mode activation
• Increased fuel consumption
• Difficulty in accelerating

DTC P1582 causes

Several factors can lead to the triggering of DTC P1582, including:

• Faulty accelerator pedal position sensors
• Wiring issues or poor connections in the sensor circuit
• Faulty Engine Control Module (ECM)
• Mechanical issues with the accelerator pedal assembly
• Calibration issues or software glitches in the ECM

DTC P1582 seriousness

DTC P1582 is considered a serious issue as it can affect vehicle performance and safety. The disagreement between the pedal position sensors can lead to unpredictable throttle response, which may pose a risk while driving. It is advisable to address this code promptly to ensure safe operation of the vehicle and to prevent further damage to the engine or transmission.

How to diagnose DTC P1582

To diagnose DTC P1582, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1582 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the wiring and connectors associated with the accelerator pedal position sensors for damage or corrosion.
4. Test the voltage and resistance of the pedal position sensors using a multimeter.
5. Compare the readings from both sensors to identify discrepancies.
6. Check the ECM for any software updates or calibration issues.

How to fix DTC P1582 step-by-step instructions

To fix DTC P1582, follow these steps:

1. Repair or replace any damaged wiring or connectors related to the pedal position sensors.
2. If one of the pedal position sensors is faulty, replace it with a new one.
3. Ensure that the accelerator pedal assembly is functioning correctly and is not obstructed.
4. Clear any stored trouble codes using an OBD-II scanner.
5. Test drive the vehicle to ensure that the issue is resolved and the check engine light does not reappear.

How to erase DTC P1582

To erase DTC P1582, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.