P1650 – OBD-II DTC

OBD-II DTC P1650 – Fuel Pump Primary Circuit Failure

DTC P1650 meaning

DTC P1650 refers to a “Fuel Pump Primary Circuit Failure.” This diagnostic trouble code indicates that the Engine Control Module (ECM) has detected a malfunction in the primary circuit of the fuel pump. The fuel pump is essential for delivering fuel from the tank to the engine, and any issues in this circuit can lead to engine performance problems or failure to start.

DTC P1650 symptoms

Common symptoms associated with DTC P1650 may include:

• Engine cranking but not starting
• Intermittent engine stalling
• Loss of power during acceleration
• Fuel gauge malfunction
• Check Engine Light illuminated

DTC P1650 causes

Several factors can lead to the triggering of DTC P1650, including:

• Faulty fuel pump
• Damaged wiring or connectors in the fuel pump circuit
• Defective fuel pump relay
• Issues with the ECM or its programming
• Blown fuses related to the fuel pump circuit

DTC P1650 seriousness

DTC P1650 is considered a serious issue because it can prevent the engine from starting or cause it to stall while driving. This can lead to unsafe driving conditions and potential accidents. It is important to address this code promptly to ensure the vehicle operates safely and reliably.

How to diagnose DTC P1650

To diagnose DTC P1650, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1650 code.
2. Inspect the fuel pump relay and fuses for any signs of damage or failure.
3. Check the wiring and connectors in the fuel pump circuit for corrosion or breaks.
4. Test the fuel pump for proper operation using a multimeter.
5. Examine the ECM for any faults or programming issues.

How to fix DTC P1650 step-by-step instructions

To fix DTC P1650, follow these steps:

1. Replace any blown fuses related to the fuel pump circuit.
2. Repair or replace damaged wiring or connectors in the fuel pump circuit.
3. Replace the fuel pump relay if it is found to be faulty.
4. Install a new fuel pump if the existing one is defective.
5. Reprogram or replace the ECM if necessary.
6. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC P1650

To erase DTC P1650, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.