P1652 – OBD-II DTC

OBD-II DTC P1652 – Fuel Pump Monitor Circuit Low Input

DTC P1652 meaning

DTC P1652 refers to a diagnostic trouble code indicating a low input signal from the fuel pump monitor circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components to ensure proper operation. The fuel pump monitor circuit is responsible for providing feedback to the engine control module (ECM) regarding the status of the fuel pump. A low input signal suggests that the ECM is not receiving the expected voltage or signal from the fuel pump circuit, which can lead to fuel delivery issues.

DTC P1652 symptoms

Common symptoms associated with DTC P1652 may include:

• Engine stalling or difficulty starting
• Reduced engine performance or power loss
• Increased fuel consumption
• Check Engine Light (CEL) illuminated
• Unusual noises from the fuel pump

DTC P1652 causes

Several factors can contribute to the occurrence of DTC P1652, including:

• Faulty fuel pump
• Wiring issues, such as damaged or corroded connectors
• Defective fuel pump relay
• Malfunctioning ECM
• Low fuel pressure due to a clogged fuel filter

DTC P1652 seriousness

DTC P1652 can be considered serious as it may lead to inadequate fuel delivery, resulting in engine performance issues. If left unaddressed, it can cause further damage to the fuel system or lead to complete engine failure. It is advisable to diagnose and repair the issue promptly to ensure the vehicle operates safely and efficiently.

How to diagnose DTC P1652

To diagnose DTC P1652, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1652 code.
2. Inspect the fuel pump and its wiring for any visible damage or corrosion.
3. Check the fuel pump relay for proper operation.
4. Test the voltage and ground at the fuel pump connector.
5. Measure the fuel pressure to ensure it meets manufacturer specifications.
6. Examine the ECM for any faults or updates that may be necessary.

How to fix DTC P1652 step-by-step instructions

To fix DTC P1652, follow these step-by-step instructions:

1. Confirm the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors in the fuel pump circuit.
3. Replace the fuel pump relay if it is found to be faulty.
4. Replace the fuel pump if it is not functioning correctly.
5. Ensure the fuel filter is clean and replace it if necessary.
6. Clear the DTC using the OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC P1652

To erase DTC P1652, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.