P1660 – OBD-II DTC

OBD-II DTC P1660 – PSP Switch Input Malfunction

DTC P1660 meaning

DTC P1660 refers to a malfunction in the Power Steering Pressure (PSP) switch input. This code indicates that the Engine Control Module (ECM) has detected an issue with the signal from the PSP switch, which is responsible for monitoring the power steering system’s pressure. The PSP switch plays a crucial role in providing feedback to the ECM about the steering system’s operation, which can affect engine performance and steering assist.

DTC P1660 symptoms

Common symptoms associated with DTC P1660 may include:

• Illuminated check engine light
• Increased steering effort, especially at low speeds
• Unusual noises from the power steering system
• Erratic power steering assist
• Potential loss of power steering assist

DTC P1660 causes

Several factors can lead to the triggering of DTC P1660, including:

• Faulty power steering pressure switch
• Wiring issues, such as damaged or corroded connectors
• Low power steering fluid levels
• Faulty power steering pump
• ECM software issues or malfunctions

DTC P1660 seriousness

DTC P1660 can be considered serious, as it may indicate a problem with the power steering system. If left unaddressed, it can lead to:

• Increased difficulty in steering, especially at low speeds
• Potential for complete loss of power steering assist
• Increased wear on steering components
• Safety risks while driving due to compromised steering control

How to diagnose DTC P1660

To diagnose DTC P1660, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1660 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the power steering pressure switch and its wiring for damage or corrosion.
4. Verify the power steering fluid level and condition.
5. Test the power steering pressure switch using a multimeter to ensure it operates within specifications.
6. Check the power steering pump for proper operation.
7. Examine the ECM for any software updates or malfunctions.

How to fix DTC P1660 step-by-step instructions

To fix DTC P1660, follow these steps:

1. Address any wiring issues by repairing or replacing damaged connectors.
2. Replace the faulty power steering pressure switch if it fails the multimeter test.
3. Top off or replace the power steering fluid if levels are low or fluid is contaminated.
4. Inspect and, if necessary, replace the power steering pump if it is not functioning correctly.
5. Reprogram or update the ECM if software issues are identified.
6. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC P1660

To erase DTC P1660, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.