P1689 – OBD-II DTC

OBD-II DTC P1689 – Metering Oil Pump Position Sensor Circuit Malfunction

DTC P1689 meaning

DTC P1689 refers to a malfunction in the Metering Oil Pump Position Sensor Circuit. This diagnostic trouble code indicates that the Engine Control Module (ECM) has detected an issue with the signal from the metering oil pump position sensor, which is crucial for proper fuel delivery and engine performance. The metering oil pump is responsible for regulating the amount of oil delivered to the engine, and its position sensor provides feedback to the ECM to ensure optimal operation.

DTC P1689 symptoms

Common symptoms associated with DTC P1689 may include:

• Check Engine Light illuminated
• Decreased engine performance
• Increased fuel consumption
• Engine stalling or misfiring
• Difficulty starting the engine

DTC P1689 causes

Several factors can lead to the triggering of DTC P1689, including:

• Faulty metering oil pump position sensor
• Wiring issues, such as shorts or open circuits
• Corroded or loose electrical connectors
• Faulty Engine Control Module (ECM)
• Mechanical issues with the metering oil pump

DTC P1689 seriousness

DTC P1689 can be considered serious as it affects the engine’s oil delivery system, which is vital for lubrication and overall engine health. If left unaddressed, it may lead to severe engine damage, reduced performance, and increased emissions. It is advisable to diagnose and repair the issue promptly to avoid further complications.

How to diagnose DTC P1689

To diagnose DTC P1689, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P1689.
2. Inspect the metering oil pump position sensor and its wiring for visible damage.
3. Check the electrical connectors for corrosion or looseness.
4. Test the resistance and voltage of the metering oil pump position sensor using a multimeter.
5. Consult the vehicle’s service manual for specific testing procedures and specifications.
6. Clear the DTC and perform a road test to see if the code reappears.

How to fix DTC P1689 step-by-step instructions

To fix DTC P1689, follow these steps:

1. Identify and repair any wiring issues or damaged connectors related to the metering oil pump position sensor.
2. If the sensor is faulty, replace it with a new one.
3. Ensure all connections are secure and free of corrosion.
4. Check the metering oil pump for any mechanical issues and repair as necessary.
5. Reinstall any components that were removed during the diagnosis and repair process.
6. Clear the DTC using an OBD-II scanner and perform a road test to confirm the issue is resolved.

How to erase DTC P1689

To erase DTC P1689, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.