P1693 – OBD-II DTC

OBD-II DTC P1693 – Metering Oil Pump Stepping Motor Circuit Malfunction

DTC P1693 meaning

DTC P1693 refers to a malfunction in the metering oil pump stepping motor circuit. This code indicates that the Engine Control Module (ECM) has detected an issue with the electrical circuit that controls the stepping motor responsible for regulating the oil pump’s operation. The metering oil pump is crucial for maintaining proper oil pressure and flow within the engine, which is essential for lubrication and overall engine performance.

DTC P1693 symptoms

Common symptoms associated with DTC P1693 may include:

• Illuminated check engine light
• Decreased engine performance
• Increased engine noise due to inadequate lubrication
• Oil pressure warning light activation
• Potential engine overheating

DTC P1693 causes

Several factors can lead to the triggering of DTC P1693, including:

• Faulty metering oil pump stepping motor
• Wiring issues such as shorts, opens, or corrosion in the circuit
• Defective Engine Control Module (ECM)
• Poor electrical connections or damaged connectors
• Low oil levels or contaminated oil

DTC P1693 seriousness

DTC P1693 is considered a serious issue as it can lead to inadequate oil pressure and flow, which may result in engine damage if not addressed promptly. Prolonged operation with this code can lead to severe engine wear, overheating, and ultimately engine failure. It is advisable to diagnose and repair the issue as soon as possible to prevent further complications.

How to diagnose DTC P1693

To diagnose DTC P1693, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1693 code.
2. Inspect the wiring and connectors related to the metering oil pump stepping motor for any visible damage or corrosion.
3. Check the oil level and condition to ensure it is within specifications.
4. Test the metering oil pump stepping motor for proper operation using a multimeter.
5. Examine the Engine Control Module (ECM) for any faults or updates that may be required.
6. Clear the code and perform a road test to see if the code returns.

How to fix DTC P1693 step-by-step instructions

To fix DTC P1693, follow these step-by-step instructions:

1. Ensure the vehicle is safely parked and the engine is off.
2. Inspect and repair any damaged wiring or connectors related to the metering oil pump stepping motor.
3. If the metering oil pump stepping motor is faulty, replace it with a new unit.
4. Check and top off the engine oil if it is low, and replace it if it is contaminated.
5. Reconnect any disconnected components and ensure all connections are secure.
6. Clear the DTC using an OBD-II scanner.
7. Start the engine and perform a road test to verify that the issue has been resolved and the code does not return.

How to erase DTC P1693

To erase DTC P1693, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the diagnostic menu on the scanner and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the engine to ensure the check engine light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.