P1694 – OBD-II DTC

OBD-II DTC P1694 – Oil Pressure Control Solenoid Circuit Malfunction

DTC P1694 meaning

DTC P1694 refers to a malfunction in the oil pressure control solenoid circuit. This diagnostic trouble code indicates that the Engine Control Module (ECM) has detected an issue with the electrical circuit that controls the oil pressure solenoid, which is responsible for regulating oil pressure within the engine. Proper oil pressure is crucial for engine lubrication and performance, and any malfunction in this system can lead to significant engine issues.

DTC P1694 symptoms

Common symptoms associated with DTC P1694 may include:

• Illuminated check engine light
• Erratic oil pressure readings
• Engine performance issues, such as stalling or reduced power
• Unusual engine noises due to inadequate lubrication
• Increased engine temperature

DTC P1694 causes

Several factors can contribute to the occurrence of DTC P1694, including:

• Faulty oil pressure control solenoid
• Wiring issues, such as shorts or open circuits in the solenoid circuit
• Corroded or loose electrical connectors
• Faulty Engine Control Module (ECM)
• Low engine oil levels or poor oil quality

DTC P1694 seriousness

DTC P1694 can be considered serious as it directly affects the engine’s lubrication system. If left unaddressed, it may lead to:

• Severe engine damage due to inadequate lubrication
• Increased wear and tear on engine components
• Potential engine failure

It is advisable to diagnose and repair this issue promptly to avoid costly repairs and ensure the longevity of the engine.

How to diagnose DTC P1694

To diagnose DTC P1694, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P1694.
2. Inspect the oil pressure control solenoid and its wiring for visible damage.
3. Check the electrical connectors for corrosion or loose connections.
4. Test the oil pressure control solenoid for proper operation using a multimeter.
5. Verify the engine oil level and quality.
6. Check for any additional trouble codes that may provide further insight.

How to fix DTC P1694 step-by-step instructions

To fix DTC P1694, follow these steps:

1. Address any wiring issues by repairing or replacing damaged wires.
2. Clean or replace corroded electrical connectors.
3. If the oil pressure control solenoid is faulty, replace it with a new one.
4. Ensure the engine oil is at the correct level and of good quality change the oil if necessary.
5. Clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the issue is resolved and the check engine light does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.