P1700 – OBD-II DTC

OBD-II DTC P1700 – Wastegate Solenoid Circuit Malfunction

DTC P1700 meaning

DTC P1700 refers to a malfunction in the wastegate solenoid circuit, which is part of the vehicle’s turbocharging system. The wastegate solenoid controls the opening and closing of the wastegate, regulating the boost pressure produced by the turbocharger. When this circuit experiences a fault, it can lead to improper boost levels, affecting engine performance and efficiency.

DTC P1700 symptoms

Common symptoms associated with DTC P1700 may include:

• Reduced engine power or acceleration
• Increased turbo lag
• Check Engine Light (CEL) illuminated
• Unusual engine noises, such as hissing or whistling
• Engine stalling or misfiring

DTC P1700 causes

Several factors can lead to the triggering of DTC P1700, including:

• Faulty wastegate solenoid
• Wiring issues, such as shorts or open circuits
• Corroded or loose electrical connectors
• Vacuum leaks in the wastegate actuator
• Faulty engine control module (ECM)

DTC P1700 seriousness

DTC P1700 can be considered serious as it affects the vehicle’s turbocharging system. If left unaddressed, it may lead to:

• Decreased engine performance
• Poor fuel economy
• Potential engine damage due to overboost conditions
• Increased emissions

How to diagnose DTC P1700

To diagnose DTC P1700, follow these steps:

1. Use an OBD-II scanner to confirm the DTC and check for any related codes.
2. Inspect the wiring and connectors associated with the wastegate solenoid for damage or corrosion.
3. Test the wastegate solenoid for proper operation using a multimeter.
4. Check for vacuum leaks in the wastegate actuator and associated hoses.
5. Examine the ECM for any faults or updates that may be necessary.

How to fix DTC P1700 step-by-step instructions

To fix DTC P1700, follow these steps:

1. Repair or replace any damaged wiring or connectors related to the wastegate solenoid.
2. Replace the faulty wastegate solenoid if testing indicates it is not functioning correctly.
3. Seal any vacuum leaks found in the wastegate actuator or hoses.
4. Reprogram or replace the ECM if it is determined to be faulty.
5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC P1700

To erase DTC P1700, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the engine to verify that the DTC does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.