P1701 – OBD-II DTC

OBD-II DTC P1701 – Turbo Pressure Control Solenoid Circuit Malfunction

DTC P1701 meaning

DTC P1701 refers to a malfunction in the Turbo Pressure Control Solenoid Circuit. This code indicates that the Engine Control Module (ECM) has detected an issue with the solenoid responsible for regulating turbocharger pressure. The solenoid plays a crucial role in managing boost levels, which directly affects engine performance and efficiency.

DTC P1701 symptoms

Common symptoms associated with DTC P1701 may include:

• Reduced engine power or performance
• Increased turbo lag
• Check Engine Light (CEL) illuminated
• Unusual engine noises
• Poor fuel economy

DTC P1701 causes

Several factors can lead to the triggering of DTC P1701, including:

• Faulty turbo pressure control solenoid
• Wiring issues, such as shorts or open circuits
• Corroded or loose electrical connectors
• Vacuum leaks in the system
• Faulty Engine Control Module (ECM)

DTC P1701 seriousness

DTC P1701 can be considered serious as it affects the vehicle’s turbocharging system. If left unaddressed, it may lead to:

• Decreased engine performance
• Increased emissions
• Potential engine damage due to improper boost levels

How to diagnose DTC P1701

To diagnose DTC P1701, follow these steps:

1. Use an OBD-II scanner to confirm the DTC and check for any related codes.
2. Inspect the turbo pressure control solenoid for physical damage or wear.
3. Check the wiring and connectors for signs of corrosion or loose connections.
4. Test the solenoid’s resistance and operation using a multimeter.
5. Inspect for vacuum leaks in the system.
6. Review the vehicle’s service history for any previous repairs related to the turbo system.

How to fix DTC P1701 step-by-step instructions

To fix DTC P1701, follow these steps:

1. Repair or replace any damaged wiring or connectors associated with the turbo pressure control solenoid.
2. Replace the faulty turbo pressure control solenoid if testing indicates it is not functioning properly.
3. Address any vacuum leaks found during the diagnosis.
4. Clear the DTC using an OBD-II scanner.
5. Test drive the vehicle to ensure the issue is resolved and the Check Engine Light does not reappear.

How to erase DTC P1701

To erase DTC P1701, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the engine to verify that the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.