P1703 – OBD-II DTC

OBD-II DTC P1703 – Turbo Charge Control Circuit Malfunction

DTC P1703 meaning

DTC P1703 refers to a malfunction in the turbo charge control circuit. This code indicates that the Engine Control Module (ECM) has detected an issue with the signals or performance of the turbocharger control system. The turbocharger is crucial for enhancing engine performance and efficiency by forcing more air into the combustion chamber.

DTC P1703 symptoms

Common symptoms associated with DTC P1703 may include:

• Reduced engine power or performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated
• Turbocharger not functioning properly
• Unusual engine noises

DTC P1703 causes

Several factors can lead to the triggering of DTC P1703, including:

• Faulty turbocharger or wastegate
• Damaged or corroded wiring in the turbo control circuit
• Defective turbo control solenoid
• Issues with the Engine Control Module (ECM)
• Vacuum leaks affecting the turbo system

DTC P1703 seriousness

DTC P1703 is considered a moderate to serious issue. While it may not cause immediate engine failure, it can lead to significant performance problems and increased emissions. Ignoring this code can result in further damage to the turbocharger and related components, potentially leading to costly repairs.

How to diagnose DTC P1703

To diagnose DTC P1703, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1703 code.
2. Inspect the turbocharger and wastegate for physical damage or wear.
3. Check the wiring and connectors in the turbo control circuit for corrosion or damage.
4. Test the turbo control solenoid for proper operation.
5. Examine vacuum lines for leaks or blockages.
6. Review ECM data for any additional trouble codes or related issues.

How to fix DTC P1703 step-by-step instructions

To fix DTC P1703, follow these steps:

1. Repair or replace any damaged wiring or connectors in the turbo control circuit.
2. Replace the faulty turbo control solenoid if it is not functioning correctly.
3. Fix any vacuum leaks found during the diagnosis.
4. Inspect and, if necessary, replace the turbocharger or wastegate.
5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC P1703

To erase DTC P1703, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the trouble codes menu on the scanner.
4. Select the option to clear or erase codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and start the engine to verify that the Check Engine Light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.