P1704 – OBD-II DTC

OBD-II DTC P1704 – Turbo Charge Relief Circuit Malfunction

DTC P1704 meaning

DTC P1704 refers to a malfunction in the Turbo Charge Relief Circuit. This diagnostic trouble code indicates that the engine control module (ECM) has detected an issue with the circuit responsible for managing the turbocharger’s pressure relief system. The turbo charge relief circuit is crucial for preventing excessive boost pressure, which can lead to engine damage.

DTC P1704 symptoms

Common symptoms associated with DTC P1704 may include:

• Reduced engine performance
• Check Engine Light illuminated
• Turbocharger not functioning properly
• Unusual engine noises
• Increased exhaust emissions

DTC P1704 causes

Several factors can lead to the triggering of DTC P1704, including:

• Faulty turbocharger pressure relief valve
• Wiring issues or short circuits in the relief circuit
• Defective engine control module (ECM)
• Vacuum leaks affecting the turbo system
• Faulty sensors related to boost pressure

DTC P1704 seriousness

The seriousness of DTC P1704 can vary, but it is generally considered a moderate to high priority issue. If left unaddressed, it can lead to:

• Engine damage due to excessive boost pressure
• Decreased fuel efficiency
• Increased emissions
• Potential failure of the turbocharger

How to diagnose DTC P1704

To diagnose DTC P1704, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1704 code.
2. Inspect the turbo charge relief circuit for visible damage or loose connections.
3. Check the turbocharger pressure relief valve for proper operation.
4. Test the wiring and connectors for continuity and shorts.
5. Examine related sensors for faults or malfunctions.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC P1704 step-by-step instructions

To fix DTC P1704, follow these steps:

1. Identify and repair any damaged wiring or connectors in the turbo charge relief circuit.
2. Replace the faulty turbocharger pressure relief valve if necessary.
3. Ensure all vacuum lines are intact and free of leaks.
4. Test and replace any malfunctioning sensors related to boost pressure.
5. Recheck the system for proper operation after repairs.
6. Clear the DTC using an OBD-II scanner and perform a test drive.

How to erase DTC P1704

To erase DTC P1704, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the trouble codes menu on the scanner.
4. Select the option to clear or erase codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the engine to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.