P1711 – OBD-II DTC

OBD-II DTC P1711 – Not in P or N During KOEO / KOER

DTC P1711 meaning

DTC P1711 indicates that the vehicle’s transmission control module (TCM) has detected that the transmission is not in the Park (P) or Neutral (N) position during the Key On Engine Off (KOEO) or Key On Engine Running (KOER) self-test. This code is often related to issues with the transmission range sensor or the wiring associated with it.

DTC P1711 symptoms

Common symptoms associated with DTC P1711 may include:

• Transmission not shifting properly
• Check Engine Light illuminated
• Difficulty in starting the vehicle
• Unusual transmission behavior, such as slipping or harsh shifting

DTC P1711 causes

Several factors can lead to the triggering of DTC P1711, including:

• Faulty transmission range sensor
• Wiring issues, such as shorts or open circuits
• Corroded or loose connectors
• Faulty transmission control module (TCM)
• Mechanical issues within the transmission

DTC P1711 seriousness

DTC P1711 can be serious as it may affect the vehicle’s ability to shift gears properly, leading to potential safety hazards. If the vehicle cannot shift into the correct gear, it may result in stalling or difficulty in acceleration, which can be dangerous in traffic.

How to diagnose DTC P1711

To diagnose DTC P1711, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1711 code.
2. Inspect the transmission range sensor and its wiring for any visible damage or corrosion.
3. Check the connectors for secure connections and signs of wear.
4. Test the transmission range sensor using a multimeter to ensure it is functioning within specifications.
5. Examine the TCM for any fault codes that may provide additional context.
6. Perform a visual inspection of the transmission for any mechanical issues.

How to fix DTC P1711 step-by-step instructions

To fix DTC P1711, follow these steps:

1. Repair or replace any damaged wiring or connectors associated with the transmission range sensor.
2. If the transmission range sensor is faulty, replace it with a new one.
3. Clear any fault codes from the TCM using an OBD-II scanner.
4. Test drive the vehicle to ensure the issue is resolved and the check engine light does not reappear.
5. If the code returns, further diagnose the TCM or consider mechanical issues within the transmission.

How to erase DTC P1711

To erase DTC P1711, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the ON position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the check engine light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.