P1730 – OBD-II DTC

OBD-II DTC P1730 – Insufficient Engine Speed Increase During Self Test

DTC P1730 meaning

DTC P1730 refers to a diagnostic trouble code indicating “Insufficient Engine Speed Increase During Self Test.” This code is typically associated with the vehicle’s transmission control module (TCM) and suggests that the engine did not reach the expected RPM during a self-test procedure. This can indicate issues with the engine’s performance or the transmission’s ability to respond to commands.

DTC P1730 symptoms

Common symptoms associated with DTC P1730 may include:

• Check Engine Light illuminated
• Unusual engine performance
• Transmission shifting issues
• Slipping or harsh shifting
• Reduced fuel efficiency

DTC P1730 causes

Several factors can contribute to the occurrence of DTC P1730, including:

• Faulty throttle position sensor (TPS)
• Malfunctioning mass airflow sensor (MAF)
• Issues with the engine control module (ECM)
• Transmission fluid problems, such as low fluid level or contamination
• Wiring or connector issues related to the TCM or engine sensors

DTC P1730 seriousness

DTC P1730 can be considered serious as it may indicate underlying issues with the engine or transmission. If left unaddressed, it can lead to:

• Further damage to the transmission
• Increased wear on engine components
• Potential safety hazards due to erratic vehicle behavior

How to diagnose DTC P1730

To diagnose DTC P1730, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1730 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the vehicle’s wiring and connectors related to the TCM and engine sensors.
4. Test the throttle position sensor and mass airflow sensor for proper operation.
5. Check the transmission fluid level and condition.
6. Perform a visual inspection of the engine and transmission for any obvious issues.

How to fix DTC P1730 step-by-step instructions

To fix DTC P1730, follow these step-by-step instructions:

1. Address any identified wiring or connector issues by repairing or replacing as necessary.
2. If the throttle position sensor or mass airflow sensor is faulty, replace it with a new component.
3. Ensure the transmission fluid is at the correct level and in good condition replace if necessary.
4. Clear the DTC using an OBD-II scanner.
5. Test drive the vehicle to see if the code reappears.
6. If the code returns, further diagnosis may be required, potentially involving the ECM or TCM.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.