P1744 – OBD-II DTC

OBD-II DTC P1744 – Slip Solenoid System

DTC P1744 meaning

DTC P1744 refers to a problem with the slip solenoid system in the automatic transmission. This code indicates that the transmission control module (TCM) has detected an issue with the slip control of the torque converter. The slip solenoid is responsible for controlling the engagement and disengagement of the torque converter clutch, which helps improve fuel efficiency and reduce engine load.

DTC P1744 symptoms

Common symptoms associated with DTC P1744 may include:

• Slipping transmission
• Delayed or harsh shifting
• Increased engine RPMs without corresponding vehicle speed
• Check Engine Light illuminated
• Poor fuel economy

DTC P1744 causes

Several factors can lead to the triggering of DTC P1744, including:

• Faulty slip solenoid
• Wiring issues or poor connections in the solenoid circuit
• Low transmission fluid levels or dirty fluid
• Faulty transmission control module (TCM)
• Mechanical issues within the transmission

DTC P1744 seriousness

DTC P1744 can be considered serious as it may lead to transmission slipping, which can cause further damage to the transmission system. If left unaddressed, it can result in more extensive repairs and increased repair costs. Additionally, the symptoms may affect vehicle drivability and safety.

How to diagnose DTC P1744

To diagnose DTC P1744, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1744 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the transmission fluid level and condition.
4. Examine the wiring and connectors related to the slip solenoid for damage or corrosion.
5. Test the slip solenoid for proper operation using a multimeter.
6. Check the TCM for faults or updates that may affect solenoid operation.

How to fix DTC P1744 step-by-step instructions

To fix DTC P1744, follow these steps:

1. Ensure the vehicle is on a level surface and the engine is off.
2. Check and top off the transmission fluid if low or replace it if dirty.
3. Inspect and repair any damaged wiring or connectors related to the slip solenoid.
4. If the slip solenoid is faulty, replace it with a new one.
5. Reinstall any components removed during inspection and ensure all connections are secure.
6. Clear the DTC using an OBD-II scanner and take the vehicle for a test drive to verify the repair.

How to erase DTC P1744

To erase DTC P1744, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.