P1745 – OBD-II DTC

OBD-II DTC P1745 – Torque Converter Clutch Inductive Signature Malfunction

DTC P1745 meaning

DTC P1745 refers to a malfunction in the Torque Converter Clutch (TCC) Inductive Signature. This code indicates that the Engine Control Module (ECM) has detected an issue with the TCC’s ability to engage or disengage properly, which can affect the vehicle’s performance and fuel efficiency. The torque converter clutch is responsible for locking the torque converter to the engine, allowing for a direct drive and improved fuel economy.

DTC P1745 symptoms

Common symptoms associated with DTC P1745 may include:

• Slipping or shuddering during acceleration
• Increased engine RPMs without a corresponding increase in vehicle speed
• Poor fuel economy
• Transmission overheating
• Check Engine Light illuminated

DTC P1745 causes

Several factors can lead to the triggering of DTC P1745, including:

• Faulty torque converter clutch solenoid
• Wiring issues or poor connections in the TCC circuit
• Defective ECM or software issues
• Low transmission fluid levels or contaminated fluid
• Mechanical issues within the transmission

DTC P1745 seriousness

DTC P1745 can be considered serious as it may lead to significant transmission issues if not addressed. The symptoms can affect drivability and fuel efficiency, and prolonged neglect may result in more extensive damage to the transmission system. It is advisable to diagnose and repair the issue promptly to avoid further complications.

How to diagnose DTC P1745

To diagnose DTC P1745, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1745 code.
2. Inspect the transmission fluid level and condition.
3. Check the TCC solenoid and its wiring for any signs of damage or corrosion.
4. Test the TCC solenoid operation using a multimeter.
5. Examine the ECM for any software updates or faults.
6. Perform a road test to observe the vehicle’s behavior under various driving conditions.

How to fix DTC P1745 step-by-step instructions

To fix DTC P1745, follow these steps:

1. Check and top off the transmission fluid if low.
2. Replace the transmission fluid if it is contaminated.
3. Inspect and repair any damaged wiring or connectors related to the TCC solenoid.
4. Replace the TCC solenoid if it is found to be faulty.
5. Reprogram or replace the ECM if necessary.
6. Clear the DTC using an OBD-II scanner and perform a test drive to ensure the issue is resolved.

How to erase DTC P1745

To erase DTC P1745, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the “Erase Codes” or “Clear DTCs” function on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the vehicle to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.