P1796 – OBD-II DTC

OBD-II DTC P1796 – TP (Electric) Circuit Malfunction

DTC P1796 meaning

DTC P1796 refers to a malfunction in the Throttle Position (TP) electric circuit. This code indicates that the Engine Control Module (ECM) has detected an issue with the signal from the throttle position sensor, which is crucial for proper engine performance and transmission operation. The TP sensor monitors the position of the throttle plate and sends this information to the ECM to adjust fuel delivery and ignition timing accordingly.

DTC P1796 symptoms

Common symptoms associated with DTC P1796 may include:

• Check Engine Light illuminated
• Unresponsive throttle or poor acceleration
• Engine stalling or hesitation during acceleration
• Transmission shifting issues
• Reduced engine power or limp mode activation

DTC P1796 causes

Several factors can lead to the triggering of DTC P1796, including:

• Faulty throttle position sensor
• Wiring issues such as shorts, opens, or corrosion in the TP circuit
• Faulty Engine Control Module (ECM)
• Improperly calibrated throttle body
• Vacuum leaks affecting throttle operation

DTC P1796 seriousness

DTC P1796 is considered a serious issue as it can lead to significant engine performance problems. If left unaddressed, it may result in:

• Increased emissions
• Potential engine damage due to improper fuel delivery
• Unsafe driving conditions due to loss of throttle response

How to diagnose DTC P1796

To diagnose DTC P1796, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1796 code.
2. Inspect the throttle position sensor and its wiring for any visible damage or corrosion.
3. Check the voltage and ground signals at the TP sensor using a multimeter.
4. Test the throttle position sensor for proper operation by comparing its output to manufacturer specifications.
5. Examine the ECM for any signs of failure or software issues.

How to fix DTC P1796 step-by-step instructions

To fix DTC P1796, follow these steps:

1. Repair or replace any damaged wiring or connectors in the throttle position circuit.
2. If the throttle position sensor is faulty, replace it with a new one.
3. Ensure that the throttle body is clean and properly calibrated.
4. Reprogram or replace the ECM if it is determined to be faulty.
5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC P1796

To erase DTC P1796, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the “Erase Codes” or “Clear DTCs” function on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.