P1807 – OBD-II DTC

OBD-II DTC P1807 – Transmission Clutch Interlock Safety Switch Short Circuit To Battery

DTC P1807 meaning

DTC P1807 refers to a diagnostic trouble code indicating a short circuit in the transmission clutch interlock safety switch to the battery. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle systems for faults. The transmission clutch interlock safety switch is designed to prevent the vehicle from starting unless the clutch pedal is fully depressed. A short circuit in this switch can lead to improper vehicle operation and safety concerns.

DTC P1807 symptoms

Common symptoms associated with DTC P1807 may include:

• Vehicle not starting
• Engine cranking but not starting
• Intermittent starting issues
• Check Engine Light illuminated
• Transmission not engaging properly

DTC P1807 causes

Several factors can lead to the occurrence of DTC P1807, including:

• Faulty transmission clutch interlock safety switch
• Wiring issues, such as frayed or damaged wires
• Corrosion or poor connections in the electrical circuit
• Short circuit to battery voltage
• Faulty engine control module (ECM)

DTC P1807 seriousness

DTC P1807 is considered a serious issue as it can prevent the vehicle from starting or cause transmission problems. This can lead to unsafe driving conditions and may leave the driver stranded. It is important to address this code promptly to ensure the vehicle operates safely and reliably.

How to diagnose DTC P1807

To diagnose DTC P1807, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1807 code.
2. Inspect the transmission clutch interlock safety switch for physical damage or wear.
3. Check the wiring and connectors for signs of corrosion, fraying, or disconnection.
4. Test the continuity of the switch and wiring using a multimeter.
5. Verify that the battery voltage is within the normal range.
6. Check for any additional trouble codes that may provide further insight.

How to fix DTC P1807 step-by-step instructions

To fix DTC P1807, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and replace the transmission clutch interlock safety switch if it is faulty.
3. Repair or replace any damaged wiring or connectors found during the inspection.
4. Ensure all connections are clean and secure to prevent future issues.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the issue is resolved and the check engine light does not reappear.

How to erase DTC P1807

To erase DTC P1807, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Follow the prompts to clear the trouble code from the vehicle’s computer.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.