P1810 – OBD-II DTC

OBD-II DTC P1810 – Transmission 4-Wheel Drive High Indicator Open Circuit

DTC P1810 meaning

DTC P1810 refers to a diagnostic trouble code that indicates an issue with the 4-wheel drive (4WD) high indicator circuit in a vehicle’s transmission system. Specifically, it signifies that there is an open circuit in the 4WD high indicator, which means that the signal from the switch or sensor that indicates the 4WD high mode is not being received by the vehicle’s onboard computer. This can lead to improper functioning of the 4WD system.

DTC P1810 symptoms

Common symptoms associated with DTC P1810 may include:

• Illumination of the check engine light
• Inability to engage or disengage 4WD high mode
• Erratic or non-functional 4WD system
• Transmission shifting issues
• Unusual noises from the transmission or transfer case

DTC P1810 causes

Several factors can lead to the occurrence of DTC P1810, including:

• Faulty 4WD high indicator switch
• Wiring issues, such as damaged or corroded wires
• Connector problems, including loose or corroded connections
• Faulty transmission control module (TCM)
• Issues within the transfer case

DTC P1810 seriousness

The seriousness of DTC P1810 can vary depending on the vehicle’s use and the extent of the issue. It is important to address this code promptly because:

• It can affect the vehicle’s ability to operate in 4WD mode, which is crucial for off-road or adverse weather conditions.
• Ignoring the issue may lead to further damage to the transmission or transfer case.
• It can result in decreased vehicle performance and handling.

How to diagnose DTC P1810

To diagnose DTC P1810, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1810 code.
2. Inspect the 4WD high indicator switch for proper operation.
3. Check the wiring and connectors for any signs of damage or corrosion.
4. Test the continuity of the circuit from the switch to the TCM.
5. Examine the transmission control module for any faults.
6. Perform a visual inspection of the transfer case for any issues.

How to fix DTC P1810 step-by-step instructions

To fix DTC P1810, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the 4WD high indicator circuit.
3. Replace the faulty 4WD high indicator switch if necessary.
4. Test the transmission control module and replace it if it is found to be faulty.
5. Recheck the system to ensure the issue is resolved and the DTC does not return.

How to erase DTC P1810

To erase DTC P1810 from the vehicle’s computer, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.