P1813 – OBD-II DTC

OBD-II DTC P1813 – Transmission 4-Wheel Drive Low Indicator Circuit Failure

DTC P1813 meaning

DTC P1813 refers to a fault in the Transmission 4-Wheel Drive Low Indicator Circuit. This code indicates that the vehicle’s onboard diagnostic system has detected a malfunction in the circuit responsible for signaling when the vehicle is in 4-wheel drive low mode. The low indicator light may not function correctly, leading to potential confusion about the vehicle’s drive mode.

DTC P1813 symptoms

Common symptoms associated with DTC P1813 may include:

• Illumination of the 4WD low indicator light on the dashboard.
• Inability to engage or disengage 4-wheel drive low mode.
• Transmission shifting issues or erratic behavior.
• Potential loss of traction in off-road conditions.

DTC P1813 causes

Several factors can lead to the occurrence of DTC P1813, including:

• Faulty wiring or connectors in the 4WD low indicator circuit.
• Defective 4WD low switch or sensor.
• Issues with the transmission control module (TCM).
• Corrosion or damage in the circuit components.

DTC P1813 seriousness

DTC P1813 is considered a moderate issue. While it may not immediately affect the drivability of the vehicle, it can lead to complications in off-road situations or adverse weather conditions where 4-wheel drive is necessary. Ignoring this code may result in further transmission problems or damage over time.

How to diagnose DTC P1813

To diagnose DTC P1813, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1813 code.
2. Inspect the wiring and connectors related to the 4WD low indicator circuit for any visible damage or corrosion.
3. Test the 4WD low switch for proper operation using a multimeter.
4. Check the transmission control module for any fault codes or issues.
5. Perform a continuity test on the circuit to ensure there are no breaks.

How to fix DTC P1813 step-by-step instructions

To fix DTC P1813, follow these steps:

1. Repair or replace any damaged wiring or connectors found during the diagnosis.
2. If the 4WD low switch is faulty, replace it with a new one.
3. Clear any fault codes from the transmission control module using an OBD-II scanner.
4. Test the system to ensure the 4WD low indicator light functions correctly.
5. Perform a road test to confirm that the vehicle can engage and disengage 4-wheel drive low mode without issues.

How to erase DTC P1813

To erase DTC P1813, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to clear the DTC from the system.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.