P1814 – OBD-II DTC

OBD-II DTC P1814 – Transmission 4-Wheel Drive Low Indicator Open Circuit

DTC P1814 meaning

DTC P1814 refers to a diagnostic trouble code indicating an issue with the transmission’s 4-wheel drive low indicator circuit. Specifically, it signifies that there is an open circuit in the system that monitors the low-range operation of the 4-wheel drive. This can prevent the vehicle from properly engaging or indicating when it is in low-range mode.

DTC P1814 symptoms

Common symptoms associated with DTC P1814 may include:

• Illuminated check engine light
• Inability to engage 4-wheel drive low
• Erratic or incorrect 4-wheel drive indicator lights
• Transmission shifting issues
• Potential loss of traction in off-road conditions

DTC P1814 causes

Several factors can lead to the occurrence of DTC P1814, including:

• Faulty wiring or connectors in the 4-wheel drive low indicator circuit
• Defective 4-wheel drive low switch
• Malfunctioning transmission control module (TCM)
• Corrosion or damage in the electrical connections
• Software issues within the vehicle’s control systems

DTC P1814 seriousness

The seriousness of DTC P1814 can vary based on the vehicle’s usage. While it may not immediately affect the drivability of the vehicle, it can lead to:

• Inability to use 4-wheel drive low, which is critical in off-road or slippery conditions
• Potential for further transmission issues if left unaddressed
• Increased risk of getting stuck in challenging driving conditions

How to diagnose DTC P1814

To diagnose DTC P1814, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1814 code.
2. Inspect the wiring and connectors related to the 4-wheel drive low indicator for damage or corrosion.
3. Test the 4-wheel drive low switch for proper operation.
4. Check the transmission control module for any software updates or faults.
5. Clear the code and perform a road test to see if the code returns.

How to fix DTC P1814 step-by-step instructions

To fix DTC P1814, follow these step-by-step instructions:

1. Inspect and repair any damaged wiring or connectors in the 4-wheel drive low indicator circuit.
2. Replace the 4-wheel drive low switch if it is found to be defective.
3. Reprogram or replace the transmission control module if necessary.
4. Ensure all electrical connections are clean and free of corrosion.
5. Clear the DTC using an OBD-II scanner and perform a test drive to verify the issue is resolved.

How to erase DTC P1814

To erase DTC P1814, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the trouble codes menu on the scanner.
4. Select the option to clear or erase codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and start the vehicle to ensure the check engine light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.