OBD-II DTC P1847 – Transmission Transfer Case Differential Lock-Up Feedback Switch Circuit Failure
DTC P1847 meaning
DTC P1847 refers to a diagnostic trouble code that indicates a failure in the Transmission Transfer Case Differential Lock-Up Feedback Switch Circuit. This code is specific to the vehicle’s transmission system and is related to the feedback mechanism that informs the engine control module (ECM) about the status of the differential lock-up feature in the transfer case.
DTC P1847 symptoms
Common symptoms associated with DTC P1847 may include:
- Illuminated check engine light
- Transmission shifting issues
- Inability to engage or disengage the differential lock
- Unusual noises from the transfer case
- Reduced fuel efficiency
DTC P1847 causes
Several factors can lead to the occurrence of DTC P1847, including:
- Faulty feedback switch
- Wiring issues, such as shorts or open circuits
- Corrosion or damage to connectors
- Malfunctioning transfer case control module
- Software issues in the ECM
DTC P1847 seriousness
DTC P1847 can be considered serious as it may affect the vehicle’s drivability and safety. If the differential lock-up feature is not functioning correctly, it can lead to poor traction in slippery conditions, increased wear on the drivetrain, and potential damage to the transmission system.
How to diagnose DTC P1847
To diagnose DTC P1847, follow these steps:
- Use an OBD-II scanner to confirm the presence of the code.
- Inspect the wiring and connectors related to the feedback switch for damage or corrosion.
- Test the feedback switch for proper operation using a multimeter.
- Check the transfer case control module for any faults or software updates.
- Clear the code and perform a road test to see if the code reappears.
How to fix DTC P1847 step-by-step instructions
To fix DTC P1847, follow these step-by-step instructions:
- Identify and repair any damaged wiring or connectors related to the feedback switch.
- Replace the faulty feedback switch if it fails the testing.
- Ensure that the transfer case control module is functioning correctly and update the software if necessary.
- Reassemble any components that were removed during the inspection.
- Clear the DTC using an OBD-II scanner and perform a test drive to verify the repair.
How to erase DTC P1847
To erase DTC P1847, follow these steps:
- Connect an OBD-II scanner to the vehicle’s diagnostic port.
- Turn on the ignition without starting the engine.
- Navigate to the trouble codes section on the scanner.
- Select the option to clear or erase the codes.
- Confirm the action and wait for the scanner to indicate that the codes have been cleared.
Recommended tools for OBD-II diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.