P1867 – OBD-II DTC

OBD-II DTC P1867 – Transmission Transfer Case Contact Plate Power Circuit Failure

DTC P1867 meaning

DTC P1867 refers to a diagnostic trouble code indicating a failure in the power circuit of the transmission transfer case contact plate. This code is specific to the vehicle’s onboard diagnostics system and is related to the transfer case, which is responsible for distributing power to the front and rear axles in four-wheel-drive vehicles. A malfunction in this circuit can lead to improper operation of the transfer case, affecting the vehicle’s ability to switch between drive modes.

DTC P1867 symptoms

Common symptoms associated with DTC P1867 may include:

• Inability to engage or disengage four-wheel drive
• Erratic shifting or transmission performance
• Illumination of the check engine light
• Transmission slipping or harsh shifting
• Unusual noises from the transfer case

DTC P1867 causes

Several factors can contribute to the occurrence of DTC P1867, including:

• Faulty transfer case contact plate
• Wiring issues, such as shorts or open circuits
• Corrosion or damage to electrical connectors
• Malfunctioning transfer case control module
• Low transmission fluid levels or contamination

DTC P1867 seriousness

DTC P1867 is considered a serious issue as it can affect the vehicle’s drivability and safety. If the transfer case is unable to function correctly, it may lead to loss of traction in adverse conditions, increasing the risk of accidents. It is advisable to address this code promptly to ensure the vehicle operates safely and effectively.

How to diagnose DTC P1867

To diagnose DTC P1867, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1867 code.
2. Inspect the transfer case contact plate and associated wiring for visible damage or corrosion.
3. Check the electrical connectors for secure connections and signs of wear.
4. Test the voltage and ground at the contact plate using a multimeter.
5. Examine the transfer case control module for faults or software issues.
6. Perform a visual inspection of the transmission fluid for contamination or low levels.

How to fix DTC P1867 step-by-step instructions

To fix DTC P1867, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on electrical components.
2. Inspect and repair any damaged wiring or connectors related to the transfer case contact plate.
3. If the contact plate is faulty, replace it with a new one.
4. Ensure all connections are secure and free from corrosion.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to verify that the issue has been resolved and the code does not reappear.

How to erase DTC P1867

To erase DTC P1867, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section of the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and start the vehicle to ensure the check engine light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.