P1908 – OBD-II DTC

OBD-II DTC P1908 – Pressure Control Solenoid “C” Short Circuit

DTC P1908 meaning

DTC P1908 refers to a diagnostic trouble code indicating a short circuit in the Pressure Control Solenoid “C” circuit. This solenoid is responsible for regulating hydraulic pressure within the transmission system, which is crucial for proper shifting and overall transmission performance. A short circuit can disrupt the solenoid’s function, leading to various transmission issues.

DTC P1908 symptoms

Common symptoms associated with DTC P1908 may include:

• Transmission slipping or harsh shifting
• Delayed engagement when shifting gears
• Check Engine Light illuminated
• Reduced fuel efficiency
• Unusual noises from the transmission

DTC P1908 causes

Several factors can lead to the occurrence of DTC P1908, including:

• Faulty Pressure Control Solenoid “C”
• Wiring issues, such as frayed or damaged wires
• Corroded connectors in the solenoid circuit
• Short circuits in the electrical system
• Faulty transmission control module (TCM)

DTC P1908 seriousness

DTC P1908 is considered a serious issue as it can significantly affect the vehicle’s transmission performance. If left unaddressed, it may lead to further transmission damage, increased repair costs, and potential safety hazards while driving. It is advisable to diagnose and repair the issue promptly.

How to diagnose DTC P1908

To diagnose DTC P1908, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1908 code.
2. Inspect the wiring and connectors related to the Pressure Control Solenoid “C” for any visible damage or corrosion.
3. Perform a continuity test on the solenoid circuit to check for short circuits.
4. Test the Pressure Control Solenoid “C” for proper operation using a multimeter.
5. Check the transmission control module (TCM) for any faults or updates.

How to fix DTC P1908 step-by-step instructions

To fix DTC P1908, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors related to the Pressure Control Solenoid “C”.
3. If the solenoid is faulty, replace it with a new one.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Test drive the vehicle to ensure the issue is resolved and monitor for any reoccurrence of the code.

How to erase DTC P1908

To erase DTC P1908, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the DTC.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.