U1004 – OBD-II DTC

OBD-II DTC U1004 – SCP (J1850) Invalid or Missing Data for EEC Programming

DTC U1004 meaning

DTC U1004 refers to a communication issue within the vehicle’s network, specifically indicating “Invalid or Missing Data for EEC Programming.” This code is associated with the SCP (Standard Corporate Protocol) communication protocol, which is used in some Ford vehicles. The Engine Control Module (ECM) is unable to receive valid data from other modules, which can hinder proper engine management and performance.

DTC U1004 symptoms

Common symptoms associated with DTC U1004 may include:

• Check Engine Light illuminated
• Engine performance issues
• Inconsistent or erratic engine behavior
• Difficulty in starting the engine
• Loss of communication with other modules

DTC U1004 causes

Several factors can lead to the occurrence of DTC U1004, including:

• Faulty wiring or connectors in the SCP network
• Defective Engine Control Module (ECM)
• Malfunctioning sensors or actuators
• Software issues within the ECM
• Corrosion or damage to the communication lines

DTC U1004 seriousness

DTC U1004 can be considered a moderate to serious issue. While it may not cause immediate catastrophic failure, it can lead to significant engine performance problems and may prevent the vehicle from operating efficiently. Ignoring this code can result in further damage to the engine or related components.

How to diagnose DTC U1004

To diagnose DTC U1004, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC U1004.
2. Check for any additional DTCs that may provide more context.
3. Inspect the wiring and connectors related to the SCP network for damage or corrosion.
4. Test the functionality of the ECM and other related modules.
5. Verify the operation of sensors and actuators that communicate with the ECM.
6. Check for software updates or reprogramming needs for the ECM.

How to fix DTC U1004 step-by-step instructions

To fix DTC U1004, follow these steps:

1. Inspect and repair any damaged wiring or connectors in the SCP network.
2. Replace any faulty sensors or actuators that may be affecting communication.
3. Reprogram or update the ECM software if necessary.
4. Clear any stored DTCs using an OBD-II scanner.
5. Test drive the vehicle to ensure the issue is resolved and the Check Engine Light does not reappear.

How to erase DTC U1004

To erase DTC U1004, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.