U1007 – OBD-II DTC

OBD-II DTC U1007 – SCP (J1850) Invalid or Missing Data for Primary Id

DTC U1007 meaning

DTC U1007 refers to a communication issue within the vehicle’s network, specifically indicating “Invalid or Missing Data for Primary Id.” This code is part of the On-Board Diagnostics II (OBD-II) system and is associated with the SCP (Serial Communication Protocol) using the J1850 standard. It suggests that the vehicle’s control modules are unable to communicate properly, leading to a failure in data transmission or reception.

DTC U1007 symptoms

Common symptoms associated with DTC U1007 may include:

• Warning lights illuminated on the dashboard, particularly the check engine light.
• Erratic behavior of electronic components or systems.
• Loss of functionality in certain vehicle features, such as power windows or locks.
• Difficulty in starting the vehicle or stalling.
• Inconsistent readings from the vehicle’s gauges.

DTC U1007 causes

Several factors can lead to the occurrence of DTC U1007, including:

• Faulty wiring or connectors in the communication network.
• Defective control modules that are unable to send or receive data.
• Corrosion or damage to the connectors or terminals.
• Software issues or bugs within the vehicle’s control systems.
• Interference from aftermarket devices or modifications.

DTC U1007 seriousness

DTC U1007 is considered a moderate to serious issue. While it may not immediately affect the vehicle’s drivability, it can lead to further complications if not addressed. The inability to communicate between control modules can result in malfunctioning systems, which may compromise safety and performance. It is advisable to diagnose and resolve this issue promptly to avoid potential breakdowns or more severe problems.

How to diagnose DTC U1007

To diagnose DTC U1007, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the U1007 code.
2. Check for any additional DTCs that may provide more context.
3. Inspect the vehicle’s wiring and connectors for signs of damage or corrosion.
4. Test the affected control modules for proper operation.
5. Verify the integrity of the SCP communication network.
6. Check for software updates or reprogramming needs for the control modules.

How to fix DTC U1007 step-by-step instructions

To fix DTC U1007, follow these step-by-step instructions:

1. Begin by addressing any wiring or connector issues found during diagnosis.
2. Repair or replace damaged wires or connectors as necessary.
3. Test the control modules to ensure they are functioning correctly.
4. If a control module is faulty, replace it with a compatible unit.
5. Clear any software issues by updating or reprogramming the control modules.
6. After repairs, use the OBD-II scanner to clear the DTC and perform a test drive.
7. Monitor the vehicle for any reoccurrence of the code.

How to erase DTC U1007

To erase DTC U1007, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase DTCs.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.