U1008 – OBD-II DTC

OBD-II DTC U1008 – SCP (J1850) Invalid or Missing Data for Engine Torque

DTC U1008 meaning

DTC U1008 refers to a communication error within the vehicle’s network, specifically indicating “Invalid or Missing Data for Engine Torque.” This code is part of the On-Board Diagnostics II (OBD-II) system and is associated with the SCP (Serial Communication Protocol) using the J1850 standard. The code suggests that the Engine Control Module (ECM) is not receiving valid data regarding engine torque from other modules, which can affect engine performance and diagnostics.

DTC U1008 symptoms

Common symptoms associated with DTC U1008 may include:

• Check Engine Light illuminated
• Reduced engine performance
• Unusual engine behavior or stalling
• Inconsistent or erratic acceleration
• Difficulty in starting the engine

DTC U1008 causes

Several factors can lead to the triggering of DTC U1008, including:

• Faulty wiring or connectors in the communication network
• Defective Engine Control Module (ECM)
• Malfunctioning sensors that provide torque data
• Issues with other control modules that communicate with the ECM
• Software glitches or outdated firmware in the ECM

DTC U1008 seriousness

DTC U1008 is considered a moderate to serious issue. While it may not cause immediate catastrophic failure, it can lead to significant performance problems and may affect the vehicle’s drivability. Ignoring this code can result in further complications, including increased emissions and potential damage to engine components over time.

How to diagnose DTC U1008

To diagnose DTC U1008, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the U1008 code.
2. Check for any additional DTCs that may provide more context.
3. Inspect the wiring and connectors related to the ECM and torque sensors for damage or corrosion.
4. Test the functionality of the torque sensors and other related components.
5. Verify the integrity of the communication network by checking for shorts or open circuits.
6. Update the ECM software if necessary.

How to fix DTC U1008 step-by-step instructions

To fix DTC U1008, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors found during diagnosis.
3. Replace any faulty torque sensors or related components.
4. Ensure all control modules are communicating properly.
5. Reprogram or update the ECM if required.
6. Test drive the vehicle to ensure the issue is resolved and the code does not return.

How to erase DTC U1008

To erase DTC U1008, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase DTCs.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.