U1014 – OBD-II DTC

OBD-II DTC U1014 – SCP (J1850) Invalid or Missing Data for Primary Id

DTC U1014 meaning

DTC U1014 refers to a communication issue within the vehicle’s network, specifically indicating “Invalid or Missing Data for Primary Id.” This code is part of the OBD-II system and is associated with the SCP (Single Wire CAN) protocol, which is used for communication between various modules in the vehicle. When this code is triggered, it suggests that a module is not receiving the expected data from another module, which can lead to various operational issues.

DTC U1014 symptoms

Common symptoms associated with DTC U1014 may include:

• Warning lights illuminated on the dashboard, such as the check engine light.
• Malfunctioning or inoperative vehicle features that rely on communication between modules.
• Erratic behavior of electronic systems, such as the radio or climate control.
• Difficulty in starting the vehicle or intermittent stalling.

DTC U1014 causes

Several factors can lead to the triggering of DTC U1014, including:

• Faulty or damaged wiring in the communication network.
• Defective or malfunctioning control modules.
• Corrosion or poor connections at the connectors of the modules.
• Software issues or bugs within the control modules.
• Interference from aftermarket devices or modifications.

DTC U1014 seriousness

The seriousness of DTC U1014 can vary depending on the specific symptoms and the vehicle’s operational status. While it may not always indicate an immediate safety concern, it can lead to:

• Increased risk of further electrical issues if left unaddressed.
• Potential failure of critical vehicle systems.
• Inability to pass emissions testing due to the check engine light being illuminated.

How to diagnose DTC U1014

To diagnose DTC U1014, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC U1014 and check for any additional codes.
2. Inspect the vehicle’s wiring and connectors for any visible damage or corrosion.
3. Check the operation of the modules involved in the communication network.
4. Perform a continuity test on the communication lines to ensure proper connectivity.
5. Review the vehicle’s service history for any recent repairs or modifications that may have affected the communication network.

How to fix DTC U1014 step-by-step instructions

To fix DTC U1014, follow these steps:

1. Repair or replace any damaged wiring or connectors found during the diagnosis.
2. Replace any faulty control modules that are not communicating properly.
3. Clear any corrosion from connectors and ensure they are securely connected.
4. Update the software of the control modules if applicable.
5. Re-scan the vehicle with the OBD-II scanner to ensure the code has been cleared and does not return.

How to erase DTC U1014

To erase DTC U1014, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the vehicle to check if the code returns.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.