U1054 – OBD-II DTC

OBD-II DTC U1054 – SCP (J1850) Invalid or Missing Data for Primary Id

DTC U1054 meaning

DTC U1054 refers to a diagnostic trouble code that indicates an issue with the communication between modules in a vehicle’s network. Specifically, it signifies that the data for the primary identifier is either invalid or missing. This code is associated with the SCP (Standard Corporate Protocol) communication protocol, which is used in some vehicles to facilitate communication between various electronic control units (ECUs).

DTC U1054 symptoms

Common symptoms associated with DTC U1054 may include:

• Illumination of the check engine light
• Loss of communication with certain modules
• Erratic behavior of vehicle systems, such as the speedometer or fuel gauge
• Inability to access certain vehicle features or settings
• Potential performance issues, such as reduced engine power

DTC U1054 causes

Several factors can lead to the occurrence of DTC U1054, including:

• Faulty wiring or connectors in the communication network
• Defective electronic control unit (ECU)
• Corrupted software or firmware in one of the modules
• Issues with the vehicle’s battery or charging system
• Interference from aftermarket devices or modifications

DTC U1054 seriousness

The seriousness of DTC U1054 can vary depending on the specific symptoms and the vehicle’s overall condition. While it may not immediately affect drivability, it can lead to:

• Increased risk of further electrical issues
• Potential safety concerns if critical systems are affected
• Inability to diagnose other related trouble codes

It is advisable to address this code promptly to prevent further complications.

How to diagnose DTC U1054

To diagnose DTC U1054, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the U1054 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the wiring and connectors related to the communication network for damage or corrosion.
4. Test the affected electronic control units for proper operation.
5. Verify the vehicle’s battery and charging system to ensure they are functioning correctly.
6. Check for any aftermarket devices that may interfere with the communication network.

How to fix DTC U1054 step-by-step instructions

To fix DTC U1054, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors in the communication network.
3. Replace any faulty electronic control units if necessary.
4. Update the software or firmware of the affected modules if applicable.
5. Ensure the vehicle’s battery and charging system are in good condition.
6. Recheck for any aftermarket devices that may be causing interference and remove them if needed.
7. After repairs, clear the DTC again and take the vehicle for a test drive to ensure the code does not return.

How to erase DTC U1054

To erase DTC U1054, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the trouble codes menu on the scanner.
4. Select the option to clear or erase trouble codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.