U1057 – OBD-II DTC

OBD-II DTC U1057 – SCP (J1850) Invalid or Missing Data for Vehicle Configuration

DTC U1057 meaning

DTC U1057 refers to a diagnostic trouble code that indicates an issue with the vehicle’s communication network, specifically related to the SCP (Standard Corporate Protocol) using the J1850 protocol. This code signifies that there is invalid or missing data concerning the vehicle’s configuration, which can affect various systems that rely on accurate vehicle information.

DTC U1057 symptoms

Common symptoms associated with DTC U1057 may include:

• Illumination of the check engine light
• Malfunctioning of certain vehicle systems
• Inconsistent or erratic behavior of the vehicle’s electronic components
• Difficulty in starting the vehicle
• Loss of communication with certain modules

DTC U1057 causes

Several factors can lead to the triggering of DTC U1057, including:

• Faulty or damaged wiring in the communication network
• Defective or malfunctioning control modules
• Corrupted or missing vehicle configuration data
• Issues with the vehicle’s battery or charging system
• Software glitches or outdated firmware in the control modules

DTC U1057 seriousness

DTC U1057 can be considered serious as it may indicate a failure in communication between critical vehicle systems. This can lead to:

• Reduced functionality of safety features
• Increased risk of vehicle malfunction
• Potential for further damage to electronic components

It is advisable to address this code promptly to ensure the vehicle operates safely and efficiently.

How to diagnose DTC U1057

To diagnose DTC U1057, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the U1057 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the vehicle’s wiring and connectors related to the SCP network for damage or corrosion.
4. Verify the integrity of the control modules and their connections.
5. Check the vehicle’s battery and charging system to ensure proper voltage levels.
6. Review the vehicle’s configuration data for any discrepancies.

How to fix DTC U1057 step-by-step instructions

To fix DTC U1057, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors in the SCP network.
3. Replace any faulty control modules if necessary.
4. Update or reprogram the vehicle’s software if outdated.
5. Ensure the vehicle’s battery and charging system are functioning correctly.
6. Recheck the vehicle configuration data and correct any issues.
7. Perform a test drive to confirm that the code does not return.

How to erase DTC U1057

To erase DTC U1057, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.