U1060 – OBD-II DTC

OBD-II DTC U1060 – SCP (J1850) Invalid or Missing Data for Primary Id

DTC U1060 meaning

DTC U1060 refers to a diagnostic trouble code that indicates an issue with the communication between modules in a vehicle’s network. Specifically, it signifies that there is invalid or missing data for the primary identifier in the SCP (Serial Communication Protocol) using the J1850 communication standard. This code typically arises when a module fails to receive or send the necessary data to other modules, leading to communication breakdowns within the vehicle’s electronic systems.

DTC U1060 symptoms

Common symptoms associated with DTC U1060 may include:

• Illumination of the check engine light
• Malfunctioning of various electronic components
• Loss of communication with certain modules
• Erratic behavior of the vehicle’s systems
• Increased fuel consumption

DTC U1060 causes

Several factors can lead to the occurrence of DTC U1060, including:

• Faulty wiring or connectors in the communication network
• Defective control modules
• Corrosion or damage to the connectors
• Software issues within the modules
• Interference from aftermarket devices

DTC U1060 seriousness

The seriousness of DTC U1060 can vary depending on the specific symptoms and the affected systems. While it may not immediately affect the vehicle’s drivability, it can lead to more significant issues if left unaddressed. Continuous communication failures can result in malfunctioning safety features, reduced performance, and increased repair costs over time. Therefore, it is advisable to diagnose and resolve this code promptly.

How to diagnose DTC U1060

To diagnose DTC U1060, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the U1060 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the vehicle’s wiring and connectors for damage or corrosion.
4. Test the affected control modules for proper operation.
5. Verify the integrity of the communication network using a multimeter.
6. Check for software updates or reprogramming needs for the modules.

How to fix DTC U1060 step-by-step instructions

To fix DTC U1060, follow these step-by-step instructions:

1. Address any wiring or connector issues found during diagnosis.
2. Replace any faulty control modules identified in the testing process.
3. Clean or repair corroded connectors to ensure proper communication.
4. Update or reprogram the software in the affected modules if necessary.
5. Clear the DTC using an OBD-II scanner and perform a test drive to verify the fix.
6. Monitor the vehicle for any reoccurrence of the code.

How to erase DTC U1060

To erase DTC U1060, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the trouble codes menu on the scanner.
4. Select the option to clear or erase trouble codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.