U1061 – OBD-II DTC

OBD-II DTC U1061 – SCP (J1850) Invalid or Missing Data for Primary Id

DTC U1061 meaning

DTC U1061 refers to a communication issue within the vehicle’s network, specifically indicating “Invalid or Missing Data for Primary Id.” This code is associated with the SCP (Standard Corporate Protocol) communication system, which is part of the J1850 protocol used in various General Motors vehicles. The code suggests that the vehicle’s control modules are unable to communicate properly, leading to a failure in receiving or sending critical data.

DTC U1061 symptoms

Common symptoms associated with DTC U1061 may include:

• Malfunction indicator lamp (MIL) illuminated
• Loss of communication with certain modules
• Erratic or non-functional vehicle features (e.g., power windows, locks)
• Inconsistent performance of the engine or transmission
• Diagnostic tools unable to read data from the vehicle

DTC U1061 causes

Several factors can lead to the occurrence of DTC U1061, including:

• Faulty wiring or connectors in the communication network
• Defective control modules (e.g., PCM, BCM)
• Corrosion or damage to the connectors
• Software issues or bugs in the control modules
• Interference from aftermarket devices or modifications

DTC U1061 seriousness

DTC U1061 is considered a moderate to serious issue. While it may not immediately affect the vehicle’s drivability, it can lead to significant problems if not addressed. The inability to communicate with certain modules can result in the loss of critical vehicle functions, potentially compromising safety and performance.

How to diagnose DTC U1061

To diagnose DTC U1061, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Check for any additional DTCs that may provide more context.
3. Inspect the vehicle’s wiring and connectors for damage or corrosion.
4. Verify the integrity of the SCP communication network.
5. Test the affected control modules for proper operation.
6. Check for software updates or reprogramming needs.

How to fix DTC U1061 step-by-step instructions

To fix DTC U1061, follow these steps:

1. Inspect and repair any damaged wiring or connectors in the communication network.
2. Replace any faulty control modules identified during diagnosis.
3. Clean any corroded connectors to ensure proper communication.
4. Reprogram or update the software of the control modules if necessary.
5. Clear the DTC using an OBD-II scanner and test drive the vehicle.
6. Recheck for any DTCs after the test drive to ensure the issue is resolved.

How to erase DTC U1061

To erase DTC U1061, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the DTC menu on the scanner and locate DTC U1061.
4. Select the option to clear or erase the DTC.
5. Turn off the ignition and disconnect the scanner.
6. Start the vehicle and monitor for the reappearance of the DTC.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.