U1062 – OBD-II DTC

OBD-II DTC U1062 – SCP (J1850) Invalid or Missing Data for Primary Id

DTC U1062 meaning

DTC U1062 refers to a communication issue within the vehicle’s network, specifically indicating “Invalid or Missing Data for Primary Id.” This code is associated with the SCP (Serial Communication Protocol) using the J1850 standard. It suggests that the vehicle’s control modules are unable to communicate properly, leading to a failure in receiving or sending critical data.

DTC U1062 symptoms

Common symptoms associated with DTC U1062 may include:

• Illumination of the Check Engine Light (CEL)
• Loss of communication with certain modules
• Erratic behavior of vehicle systems
• Inconsistent readings from sensors
• Failure of certain features, such as power windows or locks

DTC U1062 causes

Several factors can lead to the occurrence of DTC U1062, including:

• Faulty wiring or connectors in the communication network
• Defective control modules
• Corrosion or damage to connectors
• Software issues or bugs in the control modules
• Interference from aftermarket devices

DTC U1062 seriousness

DTC U1062 can be considered serious as it indicates a breakdown in communication between critical vehicle systems. This can lead to:

• Inability to diagnose other DTCs accurately
• Potential safety issues due to malfunctioning systems
• Increased risk of vehicle breakdown

How to diagnose DTC U1062

To diagnose DTC U1062, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC U1062.
2. Check for any additional DTCs that may provide more context.
3. Inspect the vehicle’s wiring and connectors for damage or corrosion.
4. Test the affected control modules for proper operation.
5. Verify the integrity of the SCP communication network.

How to fix DTC U1062 step-by-step instructions

To fix DTC U1062, follow these steps:

1. Inspect and repair any damaged wiring or connectors in the communication network.
2. Replace any faulty control modules identified during diagnosis.
3. Clean any corroded connectors to ensure proper communication.
4. Update the software of the control modules if necessary.
5. Test the vehicle to ensure that the issue is resolved and that communication is restored.

How to erase DTC U1062

To erase DTC U1062, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the DTC menu on the scanner.
3. Select the option to clear or erase DTCs.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and perform a test drive to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.