U1063 – OBD-II DTC

OBD-II DTC U1063 – SCP (J1850) Invalid or Missing Data for Primary Id

DTC U1063 meaning

DTC U1063 refers to a communication issue within the vehicle’s network, specifically indicating “Invalid or Missing Data for Primary Id.” This code is associated with the SCP (Serial Communication Protocol) using the J1850 standard. It typically means that the vehicle’s control modules are unable to communicate properly, leading to a failure in data transmission or reception.

DTC U1063 symptoms

Common symptoms associated with DTC U1063 may include:

• Illumination of the check engine light
• Loss of communication with certain modules
• Erratic behavior of vehicle systems
• Inability to read data from the vehicle’s diagnostic system
• Potential issues with vehicle performance

DTC U1063 causes

Several factors can lead to the occurrence of DTC U1063, including:

• Faulty wiring or connectors in the communication network
• Defective control modules
• Corrosion or damage to connectors
• Software issues within the control modules
• Interference from aftermarket devices

DTC U1063 seriousness

DTC U1063 can be considered serious as it indicates a communication failure between control modules. This can lead to various operational issues, including:

• Inability to diagnose other DTCs
• Malfunctioning vehicle systems
• Potential safety concerns if critical systems are affected

It is advisable to address this code promptly to ensure vehicle reliability and safety.

How to diagnose DTC U1063

To diagnose DTC U1063, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the U1063 code.
2. Check for any additional DTCs that may provide more context.
3. Inspect the vehicle’s wiring and connectors related to the communication network.
4. Test the affected control modules for proper operation.
5. Verify the integrity of the SCP network using a multimeter.
6. Check for software updates or reprogramming needs for the control modules.

How to fix DTC U1063 step-by-step instructions

To fix DTC U1063, follow these steps:

1. Repair or replace any damaged wiring or connectors found during diagnosis.
2. Replace any faulty control modules identified in the diagnostic process.
3. Clean any corrosion from connectors and ensure a secure fit.
4. Update or reprogram control modules if necessary.
5. Clear the DTC using an OBD-II scanner and perform a test drive to verify the fix.
6. Recheck for any DTCs after the test drive to ensure the issue is resolved.

How to erase DTC U1063

To erase DTC U1063, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the DTC menu on the scanner.
4. Select the option to clear or erase DTCs.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.