U1064 – OBD-II DTC

OBD-II DTC U1064 – SCP (J1850) Invalid or Missing Data for Primary Id

DTC U1064 meaning

DTC U1064 refers to a communication issue within the vehicle’s network, specifically indicating “Invalid or Missing Data for Primary Id.” This code is associated with the SCP (Standard Corporate Protocol) communication protocol, which is used in some General Motors vehicles. The code suggests that the vehicle’s control modules are unable to receive or interpret data from a primary module, leading to potential malfunctions in various systems.

DTC U1064 symptoms

Common symptoms associated with DTC U1064 may include:

• Warning lights illuminated on the dashboard, such as the check engine light.
• Loss of communication with certain vehicle systems.
• Erratic behavior of electronic components, such as the radio or climate control.
• Difficulty in starting the vehicle or intermittent stalling.

DTC U1064 causes

Several factors can lead to the triggering of DTC U1064, including:

• Faulty wiring or connectors in the SCP network.
• Defective control modules that are unable to communicate properly.
• Corrosion or damage to the connectors or terminals.
• Software issues or bugs within the control modules.
• Interference from aftermarket devices or modifications.

DTC U1064 seriousness

DTC U1064 can be considered serious as it indicates a communication failure between critical vehicle systems. This can lead to:

• Inability to monitor or control essential functions of the vehicle.
• Potential safety risks if systems like ABS or traction control are affected.
• Increased difficulty in diagnosing other related issues due to lack of data.

How to diagnose DTC U1064

To diagnose DTC U1064, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the U1064 code.
2. Check for any additional DTCs that may provide more context.
3. Inspect the wiring and connectors related to the SCP network for damage or corrosion.
4. Test the affected control modules for proper operation and communication.
5. Verify the integrity of the vehicle’s battery and charging system.

How to fix DTC U1064 step-by-step instructions

To fix DTC U1064, follow these step-by-step instructions:

1. Inspect and repair any damaged wiring or connectors in the SCP network.
2. Clean any corroded terminals and ensure secure connections.
3. Test and replace any faulty control modules as necessary.
4. Update the software of the control modules if applicable.
5. Clear the DTC using an OBD-II scanner and perform a test drive to ensure the issue is resolved.

How to erase DTC U1064

To erase DTC U1064, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the diagnostic menu and select the option to clear or erase DTCs.
3. Confirm the action and wait for the scanner to complete the process.
4. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.