U1070 – OBD-II DTC

OBD-II DTC U1070 – SCP (J1850) Invalid or Missing Data for Engine Sensors

DTC U1070 meaning

DTC U1070 refers to a diagnostic trouble code indicating “Invalid or Missing Data for Engine Sensors” in vehicles using the SCP (J1850) communication protocol. This code suggests that the Engine Control Module (ECM) is not receiving valid data from one or more engine sensors, which can lead to performance issues or malfunctions in the vehicle’s systems.

DTC U1070 symptoms

Common symptoms associated with DTC U1070 may include:

• Check Engine Light illuminated
• Engine performance issues
• Increased fuel consumption
• Rough idling or stalling
• Difficulty starting the engine

DTC U1070 causes

Several factors can lead to the occurrence of DTC U1070, including:

• Faulty engine sensors
• Wiring issues or damaged connectors
• Faulty Engine Control Module (ECM)
• Corrosion or poor connections in the sensor circuit
• Software glitches in the vehicle’s computer system

DTC U1070 seriousness

DTC U1070 can be considered serious as it indicates a communication problem between the ECM and engine sensors. If left unaddressed, it may lead to:

• Decreased engine performance
• Increased emissions
• Potential damage to engine components
• Failure to pass emissions testing

How to diagnose DTC U1070

To diagnose DTC U1070, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC U1070.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the wiring and connectors related to the engine sensors for damage or corrosion.
4. Test the affected engine sensors for proper operation using a multimeter.
5. Verify the functionality of the ECM and check for software updates.

How to fix DTC U1070 step-by-step instructions

To fix DTC U1070, follow these steps:

1. Identify the faulty engine sensor based on diagnostic tests.
2. Replace or repair the damaged sensor or wiring as needed.
3. Ensure all connections are clean and secure.
4. Reprogram or update the ECM if necessary.
5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC U1070

To erase DTC U1070, perform the following:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the trouble codes menu on the scanner.
3. Select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.