U1071 – OBD-II DTC

OBD-II DTC U1071 – SCP (J1850) Invalid or Missing Data for Engine Sensors

DTC U1071 meaning

DTC U1071 refers to a communication issue within the vehicle’s network, specifically indicating that there is invalid or missing data from engine sensors. This code is part of the On-Board Diagnostics II (OBD-II) system and is associated with the SCP (Serial Communication Protocol) using the J1850 standard. When this code is triggered, it suggests that the Engine Control Module (ECM) is not receiving the expected data from one or more sensors, which can affect the vehicle’s performance and diagnostics.

DTC U1071 symptoms

Common symptoms associated with DTC U1071 may include:

• Check Engine Light illuminated
• Engine performance issues, such as stalling or rough idling
• Inaccurate readings from the dashboard gauges
• Difficulty in starting the engine
• Potential loss of power or acceleration

DTC U1071 causes

Several factors can lead to the triggering of DTC U1071, including:

• Faulty or damaged engine sensors
• Wiring issues, such as shorts or open circuits
• Corroded or loose connectors in the sensor circuit
• Malfunctioning Engine Control Module (ECM)
• Interference from aftermarket electronic devices

DTC U1071 seriousness

DTC U1071 can be considered a moderate to serious issue, as it indicates a failure in communication between the ECM and engine sensors. If left unaddressed, it may lead to:

• Decreased engine performance
• Increased emissions
• Potential damage to engine components
• Failure to pass emissions testing

How to diagnose DTC U1071

To diagnose DTC U1071, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the U1071 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the wiring and connectors associated with the engine sensors for damage or corrosion.
4. Test the affected sensors for proper operation using a multimeter.
5. Verify the functionality of the ECM and ensure it is receiving data from the sensors.

How to fix DTC U1071 step-by-step instructions

To fix DTC U1071, follow these steps:

1. Identify the specific sensor or circuit causing the issue based on your diagnosis.
2. Repair or replace any damaged wiring or connectors.
3. If a sensor is faulty, replace it with a new one.
4. Clear the DTC using an OBD-II scanner.
5. Test drive the vehicle to ensure the code does not reappear and that the engine operates normally.

How to erase DTC U1071

To erase DTC U1071, you can follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.