U1072 – OBD-II DTC

OBD-II DTC U1072 – SCP (J1850) Invalid or Missing Data for Engine Coolant

DTC U1072 meaning

DTC U1072 refers to a communication issue within the vehicle’s network, specifically indicating “Invalid or Missing Data for Engine Coolant.” This code is part of the On-Board Diagnostics II (OBD-II) system and is associated with the SCP (Serial Communication Protocol) using the J1850 standard. It suggests that the Engine Control Module (ECM) is not receiving valid data regarding the engine coolant temperature from the appropriate sensor or module.

DTC U1072 symptoms

Common symptoms associated with DTC U1072 may include:

• Illumination of the Check Engine Light (CEL)
• Inaccurate engine coolant temperature readings
• Engine overheating or running too cool
• Potential performance issues or reduced fuel efficiency
• Other related DTCs may be present

DTC U1072 causes

Several factors can lead to the triggering of DTC U1072, including:

• Faulty engine coolant temperature sensor
• Wiring issues, such as damaged or corroded connectors
• Faulty Engine Control Module (ECM)
• Communication problems within the vehicle’s network
• Software glitches or outdated firmware in the ECM

DTC U1072 seriousness

DTC U1072 can be considered serious as it may indicate a failure in the engine coolant monitoring system. If the engine coolant temperature is not accurately reported, it can lead to overheating, which may cause severe engine damage. Therefore, it is essential to address this issue promptly to ensure the vehicle operates safely and efficiently.

How to diagnose DTC U1072

To diagnose DTC U1072, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC U1072 and any related codes.
2. Inspect the engine coolant temperature sensor and its wiring for damage or corrosion.
3. Check the vehicle’s communication network for any faults or interruptions.
4. Test the engine coolant temperature sensor using a multimeter to ensure it is functioning correctly.
5. Examine the ECM for any software updates or faults.

How to fix DTC U1072 step-by-step instructions

To fix DTC U1072, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the engine coolant temperature sensor.
3. Replace the engine coolant temperature sensor if it is found to be faulty.
4. Check the ECM for any software updates and apply them if necessary.
5. Re-scan the vehicle to ensure that DTC U1072 has not returned.

How to erase DTC U1072

To erase DTC U1072, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase DTCs.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.