U1075 – OBD-II DTC

OBD-II DTC U1075 – SCP (J1850) Invalid or Missing Data for Engine Oil Temp

DTC U1075 meaning

DTC U1075 refers to a diagnostic trouble code indicating “Invalid or Missing Data for Engine Oil Temp” in vehicles using the SCP (J1850) communication protocol. This code suggests that the Engine Control Module (ECM) is not receiving valid data regarding the engine oil temperature from the relevant sensor or module. The absence of this data can affect engine performance and diagnostics.

DTC U1075 symptoms

Common symptoms associated with DTC U1075 may include:

• Check Engine Light illuminated
• Engine performance issues
• Increased engine wear due to improper oil temperature readings
• Potential overheating of the engine

DTC U1075 causes

Several factors can lead to the triggering of DTC U1075, including:

• Faulty engine oil temperature sensor
• Wiring issues, such as damaged or corroded connectors
• Faulty Engine Control Module (ECM)
• Software glitches in the vehicle’s computer system
• Issues with the SCP communication network

DTC U1075 seriousness

DTC U1075 can be considered serious as it indicates a failure to monitor engine oil temperature accurately. This can lead to:

• Increased risk of engine damage due to overheating
• Potential for reduced engine efficiency
• Compromised vehicle safety if the engine fails while driving

How to diagnose DTC U1075

To diagnose DTC U1075, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC U1075.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the engine oil temperature sensor and its wiring for damage or corrosion.
4. Test the engine oil temperature sensor using a multimeter to ensure it is functioning correctly.
5. Examine the SCP communication network for any faults or interruptions.
6. Check the ECM for software updates or faults.

How to fix DTC U1075 step-by-step instructions

To fix DTC U1075, follow these steps:

1. Repair or replace any damaged wiring or connectors related to the engine oil temperature sensor.
2. If the engine oil temperature sensor is faulty, replace it with a new one.
3. Clear any fault codes using an OBD-II scanner.
4. Test drive the vehicle to ensure the issue is resolved and the check engine light does not reappear.
5. If the code returns, further diagnose the ECM and SCP communication network.

How to erase DTC U1075

To erase DTC U1075, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the check engine light remains off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.