U1085 – OBD-II DTC

OBD-II DTC U1085 – SCP (J1850) Invalid or Missing Data for Powertrain Status Request

DTC U1085 meaning

DTC U1085 refers to a communication issue within the vehicle’s network, specifically indicating that there is invalid or missing data for the powertrain status request. This code is associated with the SCP (Single Wire CAN) protocol, which is used for communication between various modules in the vehicle. When the powertrain control module (PCM) requests data from another module and does not receive a valid response, this code is triggered.

DTC U1085 symptoms

Common symptoms associated with DTC U1085 may include:

• Check Engine Light illuminated
• Loss of power or performance issues
• Erratic engine behavior
• Inconsistent readings from the dashboard gauges
• Communication issues with other modules

DTC U1085 causes

Several factors can lead to the triggering of DTC U1085, including:

• Faulty wiring or connectors in the SCP network
• Defective powertrain control module (PCM)
• Malfunctioning other control modules that communicate with the PCM
• Software issues or bugs in the vehicle’s control modules
• Corrosion or damage to the connectors

DTC U1085 seriousness

DTC U1085 is considered a moderate to serious issue. While it may not cause immediate vehicle failure, it can lead to performance problems and may affect the vehicle’s drivability. Ignoring this code can result in further complications, including potential damage to the powertrain components or other electronic systems.

How to diagnose DTC U1085

To diagnose DTC U1085, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the wiring and connectors related to the SCP network for damage or corrosion.
4. Test the powertrain control module and other related modules for proper operation.
5. Verify the software version of the modules and check for any available updates.
6. Perform a visual inspection of the vehicle’s electrical system for any obvious issues.

How to fix DTC U1085 step-by-step instructions

To fix DTC U1085, follow these steps:

1. Address any wiring or connector issues found during diagnosis.
2. If a faulty module is identified, replace it with a new or refurbished unit.
3. Update the software of the control modules if necessary.
4. Clear the DTC using an OBD-II scanner.
5. Test drive the vehicle to ensure the issue is resolved and the code does not return.

How to erase DTC U1085

To erase DTC U1085, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.