U1089 – OBD-II DTC

OBD-II DTC U1089 – SCP (J1850) Invalid or Missing Data for Suspension

DTC U1089 meaning

DTC U1089 refers to a diagnostic trouble code indicating “Invalid or Missing Data for Suspension” in vehicles equipped with the On-Board Diagnostics II (OBD-II) system. This code is specifically related to the communication network using the SCP (J1850) protocol, which is commonly used in Ford vehicles. The code suggests that the suspension control module is not receiving valid data from other modules or that the data is missing altogether.

DTC U1089 symptoms

Common symptoms associated with DTC U1089 may include:

• Warning lights on the dashboard, particularly the suspension or service light.
• Unusual handling or ride quality of the vehicle.
• Inconsistent or non-functional suspension adjustments.
• Possible error messages displayed on the vehicle’s information screen.

DTC U1089 causes

Several factors can lead to the occurrence of DTC U1089, including:

• Faulty suspension control module.
• Wiring issues, such as damaged or corroded connectors.
• Communication problems between modules on the SCP network.
• Software glitches or outdated firmware in the control modules.
• Faulty sensors related to the suspension system.

DTC U1089 seriousness

The seriousness of DTC U1089 can vary. While it may not immediately affect the vehicle’s ability to operate, it can lead to compromised suspension performance, which may affect safety and handling. Ignoring this code could result in further damage to the suspension system or related components, leading to more costly repairs.

How to diagnose DTC U1089

To diagnose DTC U1089, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the U1089 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the wiring and connectors related to the suspension control module for damage or corrosion.
4. Test the suspension control module for proper operation.
5. Verify communication between the suspension control module and other modules on the SCP network.
6. Check the vehicle’s battery and charging system to ensure proper voltage levels.

How to fix DTC U1089 step-by-step instructions

To fix DTC U1089, follow these steps:

1. Repair or replace any damaged wiring or connectors found during the diagnosis.
2. If the suspension control module is faulty, replace it with a new or refurbished unit.
3. Update the software or firmware of the control modules if necessary.
4. Clear any stored trouble codes using an OBD-II scanner.
5. Test drive the vehicle to ensure the issue is resolved and monitor for any reoccurrence of the code.

How to erase DTC U1089

To erase DTC U1089, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.