U1094 – OBD-II DTC

OBD-II DTC U1094 – SCP (J1850) Invalid or Missing Data for Experimental #2

DTC U1094 meaning

DTC U1094 refers to a diagnostic trouble code indicating “Invalid or Missing Data for Experimental #2” in vehicles equipped with the On-Board Diagnostics II (OBD-II) system. This code is associated with the SCP (Serial Communication Protocol) using the J1850 communication standard. It typically signifies that the vehicle’s control modules are unable to communicate properly, leading to a loss of data transmission between them.

DTC U1094 symptoms

Common symptoms associated with DTC U1094 may include:

• Illumination of the check engine light
• Loss of communication with certain modules
• Erratic or non-functional vehicle features (e.g., power windows, radio)
• Diagnostic tools unable to read data from specific modules

DTC U1094 causes

Several factors can lead to the occurrence of DTC U1094, including:

• Faulty wiring or connectors in the communication network
• Defective control modules
• Corrosion or damage to the connectors
• Software issues or bugs in the vehicle’s programming
• Interference from aftermarket devices

DTC U1094 seriousness

The seriousness of DTC U1094 can vary depending on the specific symptoms and the affected systems. While it may not immediately affect the vehicle’s drivability, it can lead to further complications if left unaddressed. It is advisable to diagnose and resolve the issue promptly to prevent potential safety hazards or additional damage to the vehicle’s systems.

How to diagnose DTC U1094

To diagnose DTC U1094, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC U1094.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the wiring and connectors related to the communication network for damage or corrosion.
4. Test the affected control modules for proper functionality.
5. Verify the integrity of the SCP communication lines.
6. Check for software updates or reprogramming needs for the control modules.

How to fix DTC U1094 step-by-step instructions

To fix DTC U1094, follow these step-by-step instructions:

1. Identify and repair any damaged wiring or connectors in the communication network.
2. Replace any faulty control modules as necessary.
3. Clean any corroded connectors to ensure proper electrical contact.
4. Update or reprogram the control modules if software issues are detected.
5. Disconnect any aftermarket devices that may interfere with communication.
6. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC U1094

To erase DTC U1094, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Access the trouble codes menu on the scanner.
4. Select the option to clear or erase trouble codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.