U1106 – OBD-II DTC

OBD-II DTC U1106 – SCP (J1850) Invalid or Missing Data for Legislated Diagnostics

DTC U1106 meaning

DTC U1106 refers to a communication issue within the vehicle’s onboard diagnostic system, specifically related to the SCP (Serial Communication Protocol) using the J1850 standard. This code indicates that there is invalid or missing data for legislated diagnostics, which can affect the vehicle’s ability to monitor and report on various systems effectively.

DTC U1106 symptoms

Common symptoms associated with DTC U1106 may include:

• Check Engine Light illuminated
• Inconsistent or erratic vehicle performance
• Failure of emissions tests
• Inability to communicate with certain modules
• Loss of functionality in certain vehicle features

DTC U1106 causes

Several factors can lead to the occurrence of DTC U1106, including:

• Faulty wiring or connectors in the communication network
• Defective control modules
• Software glitches or outdated firmware
• Corrosion or damage to the connectors
• Interference from aftermarket devices

DTC U1106 seriousness

The seriousness of DTC U1106 can vary based on the underlying cause. While it may not immediately affect vehicle safety, it can lead to:

• Increased emissions
• Potential for further diagnostic trouble codes
• Decreased vehicle performance
• Inability to diagnose other issues accurately

How to diagnose DTC U1106

To diagnose DTC U1106, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the U1106 code.
2. Check for any additional DTCs that may provide more context.
3. Inspect the vehicle’s wiring and connectors related to the communication network.
4. Test the affected control modules for proper operation.
5. Verify that the vehicle’s software is up to date.

How to fix DTC U1106 step-by-step instructions

To fix DTC U1106, follow these step-by-step instructions:

1. Inspect and repair any damaged wiring or connectors in the communication network.
2. Replace any faulty control modules as identified during diagnosis.
3. Update the vehicle’s software or firmware if necessary.
4. Clear any corrosion from connectors and ensure a secure fit.
5. Re-scan the vehicle to confirm that the DTC has been resolved.

How to erase DTC U1106

To erase DTC U1106, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the diagnostic menu and select the option to clear or erase codes.
3. Confirm the action and wait for the scanner to complete the process.
4. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.